| Paper #278 | An Experimental Investigation on Composite Fretting Mode |
| Zhu M H, Zhou Z R, Kapsa P, Vincent L, |
Tribology International, 34 (2001) 733-738.
|
| Paper #281 | The Prediction of Fretting Fatigue Resistance of Various Surface Modification Layers on 1045 Steel: Role of Fretting Maps |
| Xu G Z, Liu J J, Zhou Z R, |
Tribology International, 34 (2001) 569-575.
|
| Paper #286 | Radial Fretting Fatigue Damage of Surface Coatings |
| Zhu M H, Zhou Z R, Kapsa P, Vincent L, |
Wear 250 (2001) 650-657.
|
| Paper #634 | A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings |
| K Kubiak, S Fouvry, AM Marechal |
Wear Volume 259, Issues 1-6, July-August 2005, p. 367-376
|
| Paper #635 | A quantitative approach of Ti–6Al–4V fretting damage: friction, wear and crack nucleation |
| S Fouvry, P Duóa, P Perruchaut |
Wear Volume 257, Issues 9-10, November 2004, p. 916-929
|
| Paper #640 | High-load fretting of Ti–6Al–4V interfaces in point contact |
| X Huang and RW Neu |
Wear Volume 265, Issues 7-8, 20 September 2008, p. 971-978
|
| Paper #641 | Fretting Behavior of AISI 301 Stainless Steel Sheet n Full Hard Condition |
| M R Hirsch |
Thesis presented to the Academic Faculty Georgia Institute of Technology August 2008
|
| Paper #728 | Fretting damage in thin sheets: Analysis of an experimental configuration |
| MR Hirsch, RW Neu |
6 th International Symposium on Fretting Fatigue, Chengdu, China, April 19-21, 2010
|
| Paper #729 | Fretting behaviour of AISI 301 stainless steel sheet in full hard condition in contact with AISI 52100 steel |
| MR Hirsch, RW Neu |
Tribology - Materials, Surfaces & Interfaces 2008 VOL 2 NO 1
|
| Paper #780 | Relationships between the fretting wear behavior and the ball cratering resistance of solid lubricant coatings |
| DB Luo, V Fridrici |
Surface and Coatings Technology 2010 Volume 204, Issue 8, p. 1259-1269
|
| Paper #784 | Selecting solid lubricant coatings under fretting conditions |
| DB Luo, V Fridrici |
Wear 2010 Volume 268, Issues 5-6, p. 816-827
|
| Paper #788 | Surface property enhancement of Ni-free medical grade austenitic stainless steel by low-temperature plasma carburising |
| J Buhagiar, L Qian |
Surface and Coatings Technology 2010 Volume 205, Issue 2, p. 388-395
|
