| Paper # 65 | Tribology, Lubrication and Wear |
| Alliston-Greiner A F, Plint M A, |
Automotive Design Engineering Yearbook, Century Press, 1991, 225-229.
|
| Paper # 66 | Tribology in Engine Development: the Role of Test Methods and Procedures |
| Alliston-Greiner A F, Plint M A, |
Automotive Design Engineering Yearbook 1992, Century Press, 221-225.
|
| Paper # 68 | The Energy Pulse: a New Criterion and its Relevance to Wear in Gear Teeth and Automotive Engine Valve Trains |
| Plint M A, Alliston-Greiner A F, |
Lubrication Science, 1996, 8-3, 233-251.
|
| Paper # 69 | Guidelines for Laboratory Wear Testing |
| Alliston-Greiner A F, |
Donald Julius Groen Prize Lecture, presented at the Institution of Mechanical Engineers, December 6th 1996.
|
| Paper # 70 | Test Methods in Tribology |
| Alliston-Greiner A F, |
in "New Directions in Tribology", Plenary and Invited Papers from the First World Tribology Congress, Hutchings I. M. ed., MEP, 1997, 85-94.
|
| Paper # 72 | A New Grease Viscometer: A Study of the Influence of Shear Properties of Greases |
| Plint M A, Alliston-Greiner A F, |
NLGI Spokesman, 56 (2), 1992, 7-15.
|
| Paper # 259 | The Combined Effect of Speed and Humidity on the Wear and Friction of Silicon Nitride. |
| Gee M G, Butterfield D, |
Wear 162-164(1993)234-245.
|
| Paper # 261 | Evaluation of the Mechanical Properties of Tribochemical Films on Alumina. |
| Gee M G, Jennett N M, |
Proceedings of the MRS, 356(1995)815-820.
|
| Paper # 262 | High Resolution Characterisation of Tribochemical Films on Alumina. |
| Gee M G, Jennett N M, |
Wear, 193(1995) 133-145.
|
| Paper # 264 | High Temperature Wear of Silicon Nitride Composites. |
| Gee M G, Melandri C, de Portu G, Guicciardi S, |
Tribology International, 28(1995)403-413.
|
| Paper # 266 | Direct Measurement of Friction Applicable to Hot Strength Measurements. |
| Cox J M, Morrell R, Gee M G, |
1997
|
| Paper # 270 | Scratch Testing of Coated Surface - Challenges and New Directions. |
| Meneve J, Ronkainen H, Andersson P, Vercammen K,Camino D, Teer D G, von Stebut J, Gee M G, Jennett N M, Banks J, Bellaton B, Matthaei-Schultz E, Vetters H, |
Second International Symposium on Adhesion Measurement of Thin Films and Coatings, Ed K Mittal, Adhesion Measurement of Films and Coatings, Volume 2, pp79-106.
|
| Paper # 273 | Low Load Multiple Pass Scratch Testing for Ceramics and Hardmetals. |
| Gee M G, |
Wear 250 (2001) 264-281.
|
| Paper # 304 | Guidelines for Unlubricated Sliding Wear Tests: Part 1, General Approach. |
| Gee M G, |
NPL Report DMM(A)96, April 1993.
|
| Paper # 305 | Guidelines for Unlubricated Sliding Wear Tests: Part 2, Procedures for Pin-on-Disc Testing. |
| Gee M G, |
NPL Report DMM(A)97, April 1993.
|
| Paper # 306 | Surface Characterisation Techniques for Wear Surfaces. |
| Gee M G, |
NPL Report CMMT(A)73, July 1997
|
| Paper # 308 | Wear Testing Standards Database |
| Owen-Jones S, Gee M G, |
NPL Report CMMT(A)89, December 1997.
|
| Paper # 309 | Wear Testing Papers, Reports and Proceeding Database. |
| Owen-Jones S, Gee M G, |
NPL Report CMMT(A)90, December 1997.
|
| Paper # 310 | Wear Testing Methods and Their Relevance to Industrial Wear Problems. |
| Gee M G, Owen-Jones S, |
NPL Report CMMT(A)92, December 1997.
|
| Paper # 317 | Measurement of Friction, Heat Transfer and Strength of Oxides for Rolling or Forging Process Control Model. Project MMP6: Final Report. |
| Loveday M S, Gee M G, Brooks M R, |
NPL Report CMMT(A)210, May 1999.
|
| Paper # 319 | NPL Friction Measurement Methods: Data Assessment Methods and a Sample Database. |
| Brooks M R, Loveday M S, Gee M G, |
NPL Report, MATC(A)13, April 2001.
|
| Paper # 323 | Summary of Wear Test Methods: Notes on 10th International Conference on WEAR OF MATERIALS, Boston 1995. |
| Owen-Jones S, Gee M G, |
NPL Report CMMT(A)93, December 1997.
|
| Paper # 343 | Wear Map of Ceramics |
| Adachi K, Kato K, Chen N, |
Wear 203-204 (1997) 291-301
|
| Paper # 344 | Wear Mechanisms |
| Kato K, Adachi K, |
Modern Tribology Handbook Chapter 7
|
| Paper # 347 | An Optical Method for Assessing Scratch Damage in Bulk Materials and Coatings |
| Hutchings I M , Wang P Z, Parry G C, |
China Tribology Conference - September 2002
|
| Paper # 349 | A Tribological Tour of the Internal Combustion Engine |
| Davis F A, |
IMechE Conference - 2002
|
| Paper # 631 | A new concept in liquid jet erosion: Commissioning and proving trials |
| AJ Gant, MG Gee, G Plint, |
Wear Volume 263, Issues 1-6, 10 September 2007, Pages 284-288
|
| Paper # 691 | Lubricant test methods for sheet metal forming |
| N Bay, DD Olsson, JL Andreasen |
Tribology International 41 (2008) 844–853
|
| Paper # 708 | Design and Validation of Laboratory-scale Simulations for Selecting Tribomaterials and Surface Treatments |
| P J Blau |
Invited Paper World Tribology Congress (London) 1997
|
| Paper # 715 | The starved lubrication of piston rings in a diesel engine |
| S L Moore, G M Hamilton |
Journal of Mechanical Engineering Science Volume 20 No 6 1978
|
| Paper # 716 | The piston ring at top dead centre |
| S L Moore, G M Hamilton |
IMechE Tribology Group Proceedings 1980 Volume 194 No 36
|
| Paper # 717 | Ring pack film thickness during running-in |
| S L Moore, G M Hamilton |
The Running-in Process in Tribology, Paper VII (ii), Page 153-161, 1982
|
