| Paper #97 | The Effect of Processing Route, Composition and Hardness on the Wear Response of Chromium Bearing Steels in a Rolling-Sliding Configuration |
| Hanlon D N, Rainforth W M, Sellars C M, |
Wear, 203-204, 1997, 220-229.
|
| Paper #153 | The Rolling/Sliding Wear Response of Conventionally Processed and Spray Formed High Chromium Content Cast Iron at Ambient and Elevated Temperature |
| Hanlon D N, Rainforth W M, Sellars C M, |
Wear 225-229 (1999), 587-599.
|
| Paper #157 | Development and Use of ASTM Standards for Wear Testing |
| Blau P J, Budinski K G, |
Wear 225-229 (1999), 1159-1170.
|
| Paper #378 | Wear Behaviour of Tool Steels with added (WTi)C Particles |
| Leonard A J, Rainforth W M, |
Wear 255 (2003) 517 – 526
|
| Paper #384 | The Rolling Sliding Wear Response of Conventionally Processed and Spray Formed High Speed Steel at Ambient and Elevated Temperature |
| Hanlon D N, Rainforth W M, |
Wear 255 (2003) 956 – 966
|
| Paper #469 | High resolution observations of friction-induced oxide and its interaction with the worn surface |
| WM Rainforth, AJ Leonard, C Perrin, A Bedolla |
Tribology International Volume 35, Issue 11 , November 2002, Pages 731-748
|
| Paper #486 | Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings |
| G Bolelli, V Cannillo, L Lusvarghi, S Riccò |
Surface and Coatings Technology Volume 200, Issue 9, 8 February 2006, Pages 2995-3009
|
| Paper #546 | The wear of wrought aluminium alloys under dry sliding conditions |
| MJ Ghazali, WM Rainforth, H Jones |
Tribology International Volume 40, Issue 2, February 2007, Pages 160-169
|
| Paper #547 | Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites |
| T Sinmazçelik, T Yilmaz |
Materials & Design Volume 28, Issue 2, 2007, Pages 641-648
|
| Paper #570 | Wear behavior of austempered ductile irons with dual matrix structures |
| Y Sahin, M Erdogan, V Kilicli |
Materials Science and Engineering: A Volume 444, Issues 1-2, 25 January 2007, Pages 31-38
|
| Paper #573 | Wear behaviour of tool steels with added(WTi) C particles |
| AJ Leonard, WM Rainforth |
Wear, Volume 255, Number 1, August 2003, pp. 517-526
|
| Paper #575 | Wear mechanisms of monolithic and multicomponent nitride coatings grown by combined arc etching and unbalanced magnetron sputtering |
| Q Luo, WM Rainforth, WD Münz |
Surface and Coatings Technology Volumes 146-147, September-October 2001, Pages 430-435
|
| Paper #607 | The friction and wear of various hard-face claddings for deep-hole drilling |
| J Truhan, R Menon, F LeClaire, J Wallin, J Qu, P Blau, |
Wear Volume 263, Issues 1-6, 10 September 2007, Pages 234-239
|
| Paper #608 | Experimental Study of the Smoothing Effect of a Ceramic Rolling Element on a Bearing Raceway in Contaminated Lubrication |
| W Wang, PL Wong, F He, GTY Wan, |
Tribology Letters Volume 28, Number 1 / October, 2007
|
| Paper #609 | A quantitative analysis of the influence of carbides size distributions on wear behaviour of high-speed steel in dry rolling/sliding contact |
| C Rodenburg, WM Rainforth, |
Acta Materialia Volume 55, Issue 7, April 2007, Pages 2443-2454
|
| Paper #610 | The friction and wear of various hard-face claddings for deep-hole drilling |
| J Truhan, R Menon, F LeClaire, J Wallin, J Qu, P Blau |
Wear Volume 263, Issues 1-6, 10 September 2007, Pages 234-239
|
