| Paper # 265 | Critically Evaluated Abrasion Wear Tests on WC/Co Hardmetals. |
| Gee M G, Roebuck B, Byrne W P, |
World Tribology Conference, London, September 1997.
|
| Paper # 269 | Mechanisms of Wear in the High Stress Abrasion of WC/Co Hardmetals. |
| Gee M G, Fang Liang, Roebuck B, |
Proceedings of PM 99, Turin.
|
| Paper # 271 | Tungsten Carbide for Abrasion Resistant Applications, Using Powder Metallurgy in Design. |
| Gee M G, Roebuck B, |
Wear, Corrosion and Fatigue Resistance, Professional Engineering Publishers, April 2000, p 41-59.
|
| Paper # 274 | Wear of Tungsten Carbide-Cobalt Hardmetals and Hot Isostatically Pressed High Speed Steels under dry Abrasive Conditions. |
| Gant A, Gee M G, |
Wear 251 (2001) 908-915.
|
| Paper # 289 | Development of the Dry Sand/Rubber Wheel Abrasion Test. |
| Stevenson A. N. J., Hutchings I. M., |
Wear 195 (1996) 232-240,
|
| Paper # 291 | Abrasive Wear Resistance of Plasma-sprayed Tungsten Carbide-cobalt Coatings. |
| Chen H., Hutchings I. M., |
Surface and Coatings Technology 107 (1998) 106-114,
|
| Paper # 295 | Abrasive Wear Behaviour of an Alumina-aluminium Co-continuous Composite. |
| Imbeni V Hutchings I. M., Breslin M. C., |
Wear 233-235 (1999) 462-467,
|
| Paper # 313 | An NPL Rotating Wheel Abrasion Test. |
| Gee M G, Gant A J, Byrne W P, |
NPL Measurement Note CMMT(MN)30, November 1998.
|
| Paper # 314 | Characterisation of Baseline Hardmetals Using Property Maps. |
| Roebuck B, Bennett E G, Byrne W P, Gee M G, |
NPL Report CMMT(A)172, April 1999.
|
| Paper # 315 | Abrasion and Reciprocating Wear Testing of Ceramics and Hardmetals. |
| Gee M G, Gant A, Byrne W P, Roebuck B, |
NPL Report CMMT(A)166, May 1999.
|
| Paper # 318 | Rotating Wheel Abrasion Tests on Hardmetals and Ceramics. |
| Gee M G, Gant A, |
NPL Measurement Note CMMT(MN)46, May 1999.
|
| Paper # 322 | Procedure for Rotating Wheel Abrasion Testing. |
| Gee M G, Gant A, |
NPL Report MATC(A)54, July 2001.
|
