| Paper # 89 | Theory and Application of a Micro-Scale Abrasive Wear Test |
| Rutherford K L, Hutchings I M, |
Journal of Testing and Evaluation, JTEVA, 25(2), March 1997, 250-260.
|
| Paper # 120 | The Effects of Irradiation and Aging on the Abrasive Wear Resistance of Ultra High Molecular Weight Polyethylene |
| Choudhury M, Hutchings I M, |
Wear 203-204, 1997, 335-340.
|
| Paper # 124 | The Abrasive and Erosive Wear of Polymeric Paint Films |
| Rutherford K L, Trezona R I, Ramamurthy A C, Hutchings I M, |
Wear 203-204, 1997, 325-334.
|
| Paper # 125 | A New Technique for Determining the Micro-Scale Abrasion Resistance of Automotive Clearcoats |
| Trezona R I, Hutchings I M, Ramamurthy A C, |
97PA018, Proc. ISATA Conference on Paint and Powder Coating Applications in the Automotive Industry, Florence, 1997.
|
| Paper # 126 | The Effects of Ball Surface Condition in the Micro-Scale Abrasive Wear Test |
| Allsopp D N, Trezona R I, Hutchings I M, |
Tribology Letters, 5, 1998, 259-264.
|
| Paper # 127 | Novel Methods for Characterizing the Mechanical Durability of Automotive Paint Systems |
| Pickles M J, Trezona R I, Hutchings I M, Ramamurthy A C, Freese J W, |
SAE 980977, Presented at the SAE International Congress, Detroit, February 1998.
|
| Paper # 128 | The Role of Test Conditions on the Micro-Abrasive Wear Behaviour of Soda-Lime Glass |
| Shipway P H, |
Paper No. 11, International Conference on Erosive and Abrasive Wear (ICEAW), Cambridge, September 1998.
|
| Paper # 130 | Three-Body Abrasive Wear of Soft Materials |
| Trezona R I, Hutchings I M, |
Paper No. 114, International Conference on Erosive and Abrasive Wear (ICEAW), Cambridge, September 1998.
|
| Paper # 131 | Abrasive Wear Behaviour of an Al2O3-Al Co-Continuous Composite |
| Imbeni V, Hutchings I M, Breslin M C, |
Paper No. 133, International Conference on Erosive and Abrasive Wear (ICEAW), Cambridge, September 1998.
|
| Paper # 132 | Transitions Between Two-Body and Three-Body Abrasive Wear: Influence of Test Conditions in the Micro-Scale Abrasive Wear Test |
| Allsopp D N, Trezona R I, Hutchings I M, |
Wear of Materials Conference, April 1999, to be published in Wear.
|
| Paper # 135 | Wear Testing Methods and Their Relevance to Industrial Wear Problems |
| Gee M G, Owen-Jones S, |
NPL (National Physical Laboratory) Report CMMT (A)92, December 1997.
|
| Paper # 136 | Ball Cratering for the Measurement of Coating Wear |
| Gee M G, Gant A, |
NPL (National Physical Laboratory) Report CMMT (D)162, October 1998.
|
| Paper # 149 | Transitions Between Two-Body and Three-Body Abrasive Wear: Influence of Test Conditions in the Microscale Abrasive Wear Test |
| Trezona R I, Allsopp D N, Hutchings I M, |
Wear 225-229 (1999), 205-214.
|
| Paper # 150 | Three-Body Abrasive Wear Testing of Soft Materials |
| Trezona R I, Hutchings I M, |
Presented at 21st IRG-OECD Meeting, Amsterdam, April 1999. To be published in Wear.
|
| Paper # 272 | Ball Crater Testing for the Dry Unlubricated Wear Testing of Wear Resistant Coatings. |
| Gee M G, Wicks M, |
Surface Coating Technology, October 2000.
|
| Paper # 288 | A New Method for Measurement of Particle Abrasivity |
| Kelly D A, Hutchings I M, |
Wear 250 (2001) 76-80.
|
| Paper # 291 | Abrasive Wear Resistance of Plasma-sprayed Tungsten Carbide-cobalt Coatings. |
| Chen H., Hutchings I. M., |
Surface and Coatings Technology 107 (1998) 106-114,
|
| Paper # 293 | Three-body Abrasive Wear Testing of Soft Materials. |
| Trezona R. I, Hutchings I. M., |
Wear 233-235 (1999) 209-221,
|
| Paper # 295 | Abrasive Wear Behaviour of an Alumina-aluminium Co-continuous Composite. |
| Imbeni V Hutchings I. M., Breslin M. C., |
Wear 233-235 (1999) 462-467,
|
| Paper # 296 | Comments on Micro-scale Abrasive Wear Testing of PVD Coatings on Curved Substrates. |
| Allsopp D. N., Hutchings I. M., Trezona R. I., |
Tribology Letters 7 (1999) 229-231,
|
| Paper # 299 | Applications of the Micro-scale Abrasion Test for Coatings and Bulk Materials. |
| Hutchings I. M., |
D. Dowson, C. M. Taylor, M. Priest (eds.), Proc. 26th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series, 2000, pp. 37-42 ,
|
| Paper # 300 | Effect of Weathering on the Mechanical Durability of Automotive Clearcoats. |
| Trezona R. I., Hutchings I. M., Weakley A. P., |
Surface Coatings International, 83 (2000) 588-587,
|
| Paper # 312 | Development and Validation of Test Methods for Thin Hard Coatings (FASTE). |
| Vetters H, Meneve J, Jennett N M, Gee M G, von Stebut J, Kelly P, |
SMT Contract MAT1-CT 9400045, April 1998.
|
| Paper # 316 | Scratch Testing and Fine Scale Abrasion Testing of Hardmetals and Ceramics. |
| Gee M G, Gant A, Van den Berg L, |
NPL Report CMMT(A)175, May 1999.
|
| Paper # 320 | Procedure for Ball Cratering Test. |
| Gee M G, |
NPL Report MATC(A)52, June 2000, updated March 2001.
|
| Paper # 325 | Microabrasion of Glass - The Critical Role of Ridge Formation |
| Shipway P H, Hodge C J B, |
Wear 237 (2000) 90-97
|
| Paper # 326 | The Role of Test Conditions on Microabrasive Wear Behaviour of Soda-lime Glass |
| Shipway PH |
Wear 233-235 (1999) 191-199
|
| Paper # 328 | Some thoughts on neural network modelling of microabrasion–corrosion processes |
| P Srinivasa Pai, MT Mathew, MM Stack, LA Rocha |
Wear Volume 41, Issue 7, July 2008, p. 672-681
|
| Paper # 336 | Micro-abrasion–corrosion of cast CoCrMo—Effects of micron and sub-micron sized abrasives |
| D Sun, JA Wharton, RJK Wood |
Wear Volume 267, Issues 1-4, 15 June 2009, p. 52-60
|
| Paper # 345 | Micro-abrasive Wear of Semi-crystalline Polymers |
| Mergler Y J, Huis in t' Veld A J, |
Proceedings 29th Leeds-Lyon Symposium
|
| Paper # 346 | Review of Ball Cratering or Micro-abrasion Wear Testing of Coatings |
| M G Gee, A Gant, I Hutchings, R Bethke, K Schiffmann, K Van Acker, S Poulat, Y Gachon, |
NPL Report MATC(A)62 October 2001
|
| Paper # 348 | Micro-Abrasion of Steels: Some Thoughts on the Construction of Micro-Abrasion Maps |
| Stack M M, Mathew M, |
Dublin Tribology Conference - September 2002
|
| Paper # 351 | Critical Evaluation of Abrasion and Wear Testing of Coatings by Ball Cratering |
| Gee M G, |
NPL Report MATC(D)03
|
| Paper # 366 | Wear-mode Mapping for the Micro-scale Abrasion Test |
| Adachi K and Hutchings I M, |
Wear 255 (2003) 23 - 29
|
| Paper # 370 | Progress towards Standardisation of Ball Cratering |
| Gee M G, Gant A, Hutchings I, Bethke R, Schiffman K, Van Acker K, Poulat S, Gachon Y, von Stebut J, |
Wear 255 (2003) 1 - 13
|
| Paper # 371 | Micro-abrasion Transitions of Metallic Materials |
| Stack M M, Mathew M, |
Wear 255 (2003) 14 – 22
|
| Paper # 380 | Microscale Abrasive Wear of Polymeric Materials |
| Shipway P H, Ngao N K, |
Wear 255 (2003) 742 – 750
|
| Paper # 381 | Tribological Behaviour of CVD Diamond Films on Steel Substrates |
| Silva F J G, Fernandes A J S, Costa F M, Teixeira V, Baptista A P M, Pereira E, |
Wear 255 (2003) 846 – 853
|
| Paper # 386 | Study of Abrasive Resistance of Composites for Dental Restoration by Ball-cratering |
| Vale Antunes P, Ramalho A, |
Wear 255 (2003) 990 – 998
|
| Paper # 388 | Grooving Micro-abrasion of Polyamide 11 Coated Carbon Steel Tubulars for Downhole Application |
| Bello J D, Wood R J K, |
Wear 255 (2003) 1157 – 1167
|
| Paper # 408 | Results from an interlaboratory exercise to validate the micro-scale abrasion test |
| M G Gee, A J Gant, I M Hutchings, Y Kusano, K Schiffman, K Van Acker, S Poulat, Y Gachon, J von Stebut, P Hatto and G Plint |
Wear 259 (2005) 27-35
|
| Paper # 422 | Abrasive Wear of DLC/PVD Multilayer Coatings: AFM Studies |
| C Martini, D Prandstraller, E Lanzoni, G Poli |
Tribotest Volume 10, Issue 3 , p. 241 - 250
|
| Paper # 423 | Abrasive wear resistance of thin chromium nitride coatings measured by the ball crater test |
| K Vercammen, Z Schauperi, V Ivusic, J Meneve |
NORDTRIB 2000: 9th Nordic Symposium on Tribology; Porvoo; Finland; 11-14 June 2000. pp. 469-470. 2000
|
| Paper # 427 | An approach to elucidate the different response of PVD coatings in different tribological tests |
| JCA Batista, C Godoy, G Pintaúde, A Sinatora, A Matthews |
Surface and Coatings Technology Volumes 174-175, September-October 2003, p. 891-898
|
| Paper # 432 | Ball cratering an efficient tool for 3 body microabrasion of coated systems |
| C Leroy, KI Schiffmann, K van Acker, J von Stebut |
Surface and Coatings Technology Volume 200, Issues 1-4, 1 October 2005, p. 153-156
|
| Paper # 433 | Ball-cratering abrasion tests with large abrasive particles |
| GB Stachowiak, GW Stachowiak, JM Brandt |
Tribology International Volume 39, Issue 1, January 2006, p. 1-11
|
| Paper # 473 | Influence of load and speed on rolling micro-abrasion of CVD diamond and other hard coatings |
| K Bose, RJK Wood |
Diamond and Related Materials Volume 12, Issues 3-7, March-July 2003, p. 753-756
|
| Paper # 484 | Mapping the micro-abrasion resistance of WC/Co based coatings in aqueous conditions |
| MM Stack, MT Mathew |
Surface and Coatings Technology Volume 183, Issues 2-3, 24 May 2004, p. 337-346
|
| Paper # 488 | Methods of data analysis for the micro-scale abrasion test on coated substrates |
| Y Kusano, K Van Acker, IM Hutchings |
Surface and Coatings Technology Volume 183, Issues 2-3, 24 May 2004, p. 312-327
|
| Paper # 489 | Microabrasion- a simple method to assess surface degradation of UHMWPE following sterilisation and ageing |
| FJ Buchanan, PH Shipway |
Biomaterials, Volume 23, Number 1, January 2002, pp. 93-100
|
| Paper # 490 | Micro-abrasive wear of PVD duplex and single-layered coatings |
| JCA Batista, A Matthews, C Godoy |
Surface and Coatings Technology Volumes 142-144, July 2001, p. 1137-1143
|
| Paper # 491 | Micro-scale abrasive wear testing of CR-NX coatings |
| S Lakel, K Almi, Y Berriche |
Romanian Reports in Physics, 2007
|
| Paper # 492 | Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti, Al) N, TiN and Cr-N coatings |
| JCA Batista, C Godoy, A Matthews |
Tribology International Volume 35, Issue 6 , June 2002, p. 363-372
|
| Paper # 501 | On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments |
| MM Stack, H Jawan, MT Mathew |
Tribology International Volume 38, Issue 9, September 2005, p. 848-856
|
| Paper # 511 | Sliding and abrasive wear of composite sol–gel alumina coated Al alloys |
| S Wilson, HM Hawthorne, Q Yang, T Troczynski |
Surface and Coatings Technology Volumes 133-134, November 2000, p. 389-396
|
| Paper # 517 | Some views on micro-abrasion mechanisms for HVOF WC-Co based coatings |
| MT Mathew, MM Stack |
2007
|
| Paper # 559 | Tribological behaviour of ACD Ni-P/PVD nitride/dlc multilayered coatings |
| E Lanzoni, C Martini, G Poli, D Prandstraller, L Nobili |
Tribotest Volume 12, Issue 1 , p. 29 - 46
|
| Paper # 562 | Tribological behaviour of multi-layered PVD nitride coatings |
| V Imbeni, C Martini, E Lanzoni, G Poli, IM Hutchings |
Wear Volume 251, Number 1, October 2001, pp. 997-1002
|
| Paper # 612 | Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels |
| JO Bello, RJK Wood, JA Wharton, |
Wear Volume 263, Issues 1-6, 10 September 2007, p. 149-159
|
| Paper # 613 | Exposure effects of alkaline drilling fluid on the microscale abrasion–corrosion of WC-based hardmetals |
| MR Thakare, JA Wharton, RJK Wood, C Menger, |
Wear Volume 263, Issues 1-6, 10 September 2007, p. 125-136
|
| Paper # 614 | Wear of bulk ceramics in micro-scale abrasion—The role of abrasive shape and hardness and its relevance to testing of ceramic coatings |
| PH Shipway, JJ Hogg, |
Wear Volume 263, Issues 7-12, 10 September 2007, p. 887-895
|
| Paper # 646 | Some thoughts on neural network modelling of microabrasion–corrosion processes |
| P Srinivasa Pai, MT Mathew, MM Stack and LA Rocha |
Tribology International, Volume 41, Issue 7, July 2008, p. 672-681
|
| Paper # 647 | Characterisation of ZrO2 layers deposited on Al2O3 coating |
| Suzana Jakovljevic, Willy Hendrix, Danny Havermans and Jan Meneve |
Wear Volume 266, Issues 3-4, 5 February 2009, Pages 417-423
|
| Paper # 648 | Abrasive wear resistance of Ti1 - xAlxN hard coatings deposited by a vacuum arc system with lateral rotating cathodes |
| Xing-zhao Ding, CT Bui and XT Zeng |
Surface and Coatings Technology, Volume 203, Issues 5-7, 25 December 2008, p. 680-684
|
| Paper # 649 | Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC–Co cemented carbides |
| B Casas, U Wiklund, S Hogmark and L Llanes |
Wear Volume 265, Issues 3-4, 31 July 2008, p. 490-496
|
| Paper # 650 | Influence factors on wear resistance of two alumina matrix composites |
| FC Zhang, HH Luo, TS Wang, SG Roberts and RI Todd |
Wear Volume 265, Issues 1-2, 25 June 2008, p. 27-33
|
| Paper # 651 | Wear resistance of reaction sintered alumina/mullite composites |
| HH Luo, FC Zhang and SG Roberts |
Materials Science and Engineering: A, Volume 478, Issues 1-2, 15 April 2008, p. 270-275
|
| Paper # 652 | Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection |
| MT Mathew, MM Stack, B Matijevic, LA Rocha, and E Ariza |
Tribology International Volume 41, Issue 2, February 2008, p. 141-149
|
| Paper # 653 | Exposure effects of strong alkaline conditions on the microscale abrasion–corrosion of D-gun sprayed WC–10Co–4Cr coating |
| MR Thakare, JA Wharton, RJK Wood, C Menger, |
Tribology International, Volume 41, Issue 7, July 2008, p. 629-639
|
| Paper # 654 | Microabrasion–corrosion of cast CoCrMo alloy in simulated body fluids |
| D Sun, JA Wharton, RJK Wood, L Ma and WM Rainforth |
Tribology International, Volume 42, Issue 1, January 2009, p. 99-110
|
| Paper # 655 | Stress state and fracture behavior of alumina–mullite intragranular particulate composites |
| FC Zhang, HH Luo, TS Wang, M Zhang and YN Sun |
Composites Science and Technology, Volume 68, Issues 15-16, December 2008, p. 3245-3250
|
| Paper # 695 | Micro-abrasion-corrosion of cast CoCrMo – effects of micron and sub-micron sized abrasives |
| D Sun, JA Wharton, RJK Wood |
Wear of Materials 2009
|
| Paper # 696 | The Improvement of Hard Facing Coatings For Ground Engaging Applications by the Addition of Tungsten Carbide |
| AH Jones, P Roffey |
Wear Volume 267, Issues 5-8, 15 June 2009, p. 925-933
|
| Paper # 697 | Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings |
| MFC Andrade, RP Martinho, FJG Silva, RJD Alexandre, APM Baptista |
Wear of Materials 2009
|
| Paper # 718 | #REF! |
| D Sun, JA Wharton, RJK Wood |
Wear Volume 42, Issues 11-12, December 2009, p. 1595-1604
|
| Paper # 735 | Effects of proteins and pH on tribocorrosion performance of cast CoCrMo a combined electrochemical and tribological study |
| D Sun, JA Wharton, RJK Wood |
Tribology - Materials, Surfaces & Interfaces, Volume 2, Number 3, September 2008, 150-160(11)
|
| Paper # 743 | Abrasive wear resistance of electroless Ni-P coated aluminium after post treatment |
| R Rajendran |
Surface and Coatings Technology Volume 205, Issue 3, 25 October 2010, p. 766-772
|
| Paper # 755 | Electrodeposition and tribological characterisation of nickel nanocomposite coatings reinforced with nanotubular titanates |
| CTJ Low, JO Bello, JA Wharton, RJK Wood |
Surface and Coatings 2010 Volume 205, Issue 7, p. 1856-1863
|
| Paper # 764 | Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation |
| G Sabatini, L Ceschini, C Martini, JA Williams |
Materials & Design 2010 Volume 31, Issue 2, p. 816-828
|
| Paper # 767 | Interpretation of electrochemical measurements made during micro-scale abrasion-corrosion |
| RJK Wood, D Sun, MR Thakare |
Tribology International 2010 Volume 43, Issue 7, p. 1218-1227
|
| Paper # 770 | Metal-doped (Ti, WC) diamond-like-carbon coatings: Reactions with extreme-pressure oil additives under tribological and static conditions |
| M Kalin, E Roman, L Ozbolt |
Thin Solid Films 2010 Volume 518, Issue 15, p. 4336-4344
|
| Paper # 772 | Micro-abrasion-corrosion of a Co-Cr/UHMWPE couple in Ringer's solution: an approach to construction of mechanism and synergism maps for application to bio- … |
| MM Stack, J Jirka, MT Mathew, H Jawan, W Huang |
Wear 2010 Volume 269, Issues 5-6, p. 376-382
|
| Paper # 773 | Micro-Abrasion-Corrosion of Ti6Al4V Alloy in Simulated Artificial Hip Joint Environments |
| W Huang, G Wang |
Advanced Tribology 2010 Part 3, VII, 1005-1010
|
| Paper # 780 | Relationships between the fretting wear behavior and the ball cratering resistance of solid lubricant coatings |
| DB Luo, V Fridrici |
Surface and Coatings Technology 2010 Volume 204, Issue 8, p. 1259-1269
|
| Paper # 781 | Research on Micro-Abrasion Performances of TiN Coating in Simulated Body Fluid |
| W Huang, G Wang |
Advanced Tribology 2010 Part 3, VII, p. 1000-1004,
|
| Paper # 784 | Selecting solid lubricant coatings under fretting conditions |
| DB Luo, V Fridrici |
Wear 2010 Volume 268, Issues 5-6, p. 816-827
|
| Paper # 790 | The Effects of Protein and pH on the Tribo-Corrosion Performance of Cast CoCrMo—A Combined Electrochemical and Tribological Study |
| D Sun, J A Wharton, R J K Wood |
Advanced Tribology 2010, Part 3, V, p. 825-826
|
| Paper # 793 | Tribo-corrosion mechanisms of stainless steel in soft drinks |
| C Hodge |
Wear 2010 Volume 270, Issues 1-2, p. 104-114
|
| Paper # 803 | A review of micro-scale abrasion testing |
| A J Gant, M G Gee |
J. Phys. D: Appl. Phys. 44 (2011) 073001
|
| Paper # 806 | Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings: approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism |
| MM Stack, MT Mathew |
Electrochimica Acta Volume 56, Issue 24, 1 October 2011, Pages 8249-8259
|
| Paper # 809 | TiB2 Nanostructured Coating for GFRP Injection Moulds |
| RP Martinho, FJG Silva |
Journal of Nanoscience and Nanotechnology, Volume 11, Number 6, June 2011 , pp. 5374-5382
|
| Paper # 814 | Some views on the construction of bio-tribo-corrosion maps for a Titanium alloy in Hanks solution: particle concentration and applied loads effects |
| MM Stack, W Huang, G Wang |
Tribology International 2011 Volume 44, Issue 12, November 2011, Pages 1827-1837
|
| Paper # 821 | Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type |
| Z Kamdi, PH Shipway, KT Voisey |
Wear Volume 271, Issues 9-10, 29 July 2011, Pages 1264-1272
|
| Paper # 822 | Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel |
| F Marques, WM da Silva, JM Pardal, SSM Tavares |
Wear Volume 271, Issues 9-10, 29 July 2011, Pages 1288-1294
|
| Paper # 824 | Role of abrasive material on micro-abrasion wear tests |
| FJG Silva, RB Casais, RP Martinho |
Wear Volume 271, Issues 9-10, 29 July 2011, Pages 2632-2639
|
