| Paper # 67 | Wear of aligned silicon nitride under dry sliding conditions |
| M Belmonte, P Miranzo, MI Osendi, JR Gomes |
Wear Volume 266, Issues 1-2, 5 January 2009, p. 6-12
|
| Paper # 73 | Effect of Metallic-Coating Properties on the Tribology of Coated and Oil-Lubricated Ceramics |
| Ajayi O O, Erdemir A, Fenske G R, Erck R A, Hsieh J H, Nichols F A, |
Tribology Transactions, 37(3), 1994, 656-666.
|
| Paper # 74 | Friction and Wear of TiN Coatings: Contribution of CETRIB/INEGI to the TWA1-1993-VAMAS Round-Robin |
| Baptista A P M, |
Wear 192, 1996, 237-240.
|
| Paper # 85 | Friction and Wear Studies of a Bismaleimide |
| Tewari U S, Sharma S K, Vasudevan P, |
Tribology International, 21(10), 1988, 27-30.
|
| Paper # 86 | Physio-Chemical Studies on Potential Lubricants: Phthalocyanines |
| Tewari U S, Sharma S K, |
Tribology International, 22 (4), 1989, 253-258.
|
| Paper # 91 | Development and Tribological Assessment of Self-Lubricating Anodic Films on Aluminium |
| Wang H W, Skeldon P, Thompson G E, |
Surface Coatings and Technology, 88, 1996, 269-273.
|
| Paper # 92 | Formation and Characterisation of Self-Lubricating MoS2 Precursor Films on Anodised Aluminium |
| Wang H W, Skeldon P, Thompson G E, |
Wear 206, 1997, 187-196.
|
| Paper # 113 | Wear Bench Test of Materials Used for Piston Rings and Cylinder Liners of Internal Combustion Engines |
| Maru M M, Tanaka D K, Sinatora A, Galvano M, |
SAE 982946 (presented at VII International Mobility Technology Conference, Sao Paulo, November 9-11, 1998).
|
| Paper # 133 | Sliding wear of PP/UHMWPE blends: effect of blend composition |
| S A R Hashmi, Somit Neogi, Anuradha Pandey and Navin Chand |
Wear 247 (2001) 9-14
|
| Paper # 146 | Dry Sliding Wear Characteristics of Some Zinc-Aluminium Alloys: a Comparative Study with a Conventional Bearing Bronze at a Slow Speed |
| Prasad B K, Patwardhan A K, Yegneswaran A H, |
Wear 199, 1996, 142-151.
|
| Paper # 157 | Development and Use of ASTM Standards for Wear Testing |
| Blau P J, Budinski K G, |
Wear 225-229 (1999), 1159-1170.
|
| Paper # 192 | Wear Mechanisms |
| Eyre T S, |
Powder Metallurgy, 24(2), 1981, 57-63.
|
| Paper # 237 | Sliding Wear of Plasma Nitrided Steels |
| Podgornik B, Vizintin J, |
Proc. 7th International Colloquium, Tribology 2000 - Plus, Esslingen, January 2000, Paper 24.8, 1663-1670.
|
| Paper # 239 | Comparison of Sliding and Abrasive Wear Mechanisms for Cemented Carbides and Ceramics. |
| Almond E A, Lay L A, Gee M G, |
Proceedings of 2nd International Conference on the Science of Hard Materials, Institute of Physics Conference Series No 75: p919, Adam Hilger, 1986.
|
| Paper # 240 | Results from a UK Interlaboratory Project on Dry Sliding Wear. |
| Almond E A, Gee M G, |
Wear 120 (1987)101.
|
| Paper # 241 | Some Observations of Ceramic-Metal Sliding Wear. |
| Gee M G, |
British Ceramics Proceedings, 39(1987)141.
|
| Paper # 243 | Ceramic Wear Testing and Design. |
| Gee M G, Almond E A, |
Materials Engineering and Design, Eds B F Dyson and D R Hayhurst, Proceedings of the I of M meeting on Materials and Design, May 1988, 1989, Institute of Metals, p.159.
|
| Paper # 244 | Effects from vibrations in wear testing of ceramics. |
| Gee M G, Almond E A, |
Mat Sci Technol, 4(1988)655.
|
| Paper # 245 | Effects of Test Variables in Wear Testing of Ceramics. |
| Gee M G, Almond E A, |
Mat Sci Technol, 4(1988)877.
|
| Paper # 246 | Effect of Surface Finish on the Sliding Wear of Alumina. |
| Gee M G, Almond E A, |
J Mat Sci, 25(1990)296.
|
| Paper # 249 | The Effects of Surrounding Atmosphere on the Wear of Sintered Alumina. |
| Perez-Unzueta A J, Beynon J H, Gee M G, |
To be published in Wear.
|
| Paper # 250 | Results from a UK interlaboratory exercise on the wear of alumina. |
| Gee M G, |
ASTM STP 1167, Wear Testing of Advanced Materials, pp. 129-150.
|
| Paper # 251 | Effect of Test Machine Dynamics on the Sliding Wear of Alumina, Wear Testing of Advanced Materials. |
| Gee M G, |
ASTM STP 1167, pp.24-44.
|
| Paper # 252 | Modification to the Surface Layers of Alumina in Sliding Wear. |
| Gee M G, |
British Ceramic Proceedings, 48(1991)11-25.
|
| Paper # 253 | The Formation of Glass in the Wear of Reaction Bonded Silicon Nitride. |
| Gee M G, |
J Appl Phys D, 1A(1992)A182-A188.
|
| Paper # 254 | The Application of Confocal Scanning Microscopy to the Examination of Ceramic Wear Surfaces. |
| Gee M G, McCormick N J, |
J Appl Phys D, 1A(1992)A230-235.
|
| Paper # 255 | The Formation of Aluminium Hydroxide in the Sliding Wear of Alumina. |
| Gee M G, |
Wear 153(1992)201-227.
|
| Paper # 256 | Sliding Wear of Alumina. |
| Gee M G, |
J Hard Materials, 3(1992)363-377.
|
| Paper # 258 | Wear Metrology: The Art of Determining a Material's Performance. |
| Gee M G, |
Materials World, May 1993.
|
| Paper # 260 | Wear Testing and Ceramics. |
| Gee M G, |
Proc Instn Mech Engrs, 208(1994)153-166.
|
| Paper # 267 | Measurement of Friction Under Simulated Metal Working Conditions in Miniaturised Test Systems. |
| Gee M G, Loveday M S, Brookes M R, |
1997
|
| Paper # 303 | Combined effect of speed and humidity on the wear of silicon nitride. |
| Gee M G, Butterfield D, |
NPL Report DMM (A)36, September 1991.
|
| Paper # 304 | Guidelines for Unlubricated Sliding Wear Tests: Part 1, General Approach. |
| Gee M G, |
NPL Report DMM(A)96, April 1993.
|
| Paper # 305 | Guidelines for Unlubricated Sliding Wear Tests: Part 2, Procedures for Pin-on-Disc Testing. |
| Gee M G, |
NPL Report DMM(A)97, April 1993.
|
| Paper # 307 | TiCxOy thin films for decorative applications: Tribocorrosion mechanisms and synergism |
| MT Mathew, E Ariza, LA Rocha, AC Fernandes, F Vaz |
Wear Volume 41, Issue 7, July 2008, p. 603-615
|
| Paper # 312 | Development and Validation of Test Methods for Thin Hard Coatings (FASTE). |
| Vetters H, Meneve J, Jennett N M, Gee M G, von Stebut J, Kelly P, |
SMT Contract MAT1-CT 9400045, April 1998.
|
| Paper # 350 | Laboratory Test Rig Simulation of Bore Polish |
| Gondal A K, Davis F A, Eyre T S, |
Materials Science and Technology January 1998 Vol 14
|
| Paper # 406 | Effect of carbon fibre reinforcement in the frictional behaviour of PEEK in a water lubricated environment |
| J Paulo Davim, Nuno Marques and A Monteiro Baptista |
Wear 251 (2001) 1100-1104
|
| Paper # 417 | A note on the effect of temperature on the friction and wear behaviour of carbon-fibre-reinforced Polyetheretherketone (PEEK-CF30) at dry sliding |
| JP Davim, R Cardoso |
International Journal of Microstructure and Materials Properties 2005, Volume 1, No 1, 3-10
|
| Paper # 421 | Abrasive wear behavior of TiB2 particle-reinforced copper matrix composites |
| SC Tjong, KC Lau |
Materials Science and Engineering Volume 282, Issues 1-2, 30 April 2000, p. 183-186
|
| Paper # 428 | An experimental study of the tribological behaviour of the brass/steel pair |
| JP Davim |
Journal of Materials Processing Technology, Volume 100, Number 1, 3 April 2000, p. 273-277
|
| Paper # 436 | Characterization of diamond-like carbon films deposited on commercially pure Ti and Ti–6Al–4V |
| DH Kim, HE Kim, KR Lee, CN Whang, IS Lee |
Materials Science and Engineering: C Volume 22, Issue 1, 1 October 2002, p. 9-14
|
| Paper # 446 | Corrosion and abrasive wear behaviour of laser consolidated plasma sprayed sic coating on Fe–15Cr–25Ni alloy Corrosion and abrasive wear behaviour of laser consolidated plasma sprayed sic coating on Fe-15Cr |
| SC Tjong, KC Lau, J Ku, NJ Ho |
Surface Engineering, Volume 15, Number 6, December 1999, pp. 490-494
|
| Paper # 447 | CVD diamond coated silicon nitride self-mated systems: tribological behaviour under high loads |
| CS Abreu, FJ Oliveira, M Belmonte, AJS Fernandes, JR Gomes, RF Silva |
Tribology Letters Volume 21, Number 2 / February, 2006 p. 141-151
|
| Paper # 449 | Dry sliding wear of TiB2 particle reinforced aluminium alloy composites |
| SC Tjong, KC Lau |
Materials Science and Technology, Volume 16, Number 1, January 2000, pp. 99-102
|
| Paper # 450 | Dynamic signal analyses in dry sliding wear tests |
| R Bergantin, MM Maru, MCM Farias, LR Padovese |
Journal of the Brazilian Society of Mechanical Sciences and Engineering July/September 2003, Volume 25, No 3, p. 289-292
|
| Paper # 454 | Effects of crystallinity, transcrystallinity and crystal phases of GF/PA on friction and wear mechanisms |
| HCY Cartledge, CA Baillie |
Journal of Materials Science, Volume 37, Number 14, 15 July 2002, pp. 3005-3022
|
| Paper # 457 | Evaluation of Tribological Behaviour of Polymeric Materials for Hip Prostheses Application |
| JP Davim, N Marques |
Tribology Letters Volume 11, Number 2 / August, 2001 p. 91-94
|
| Paper # 462 | Friction and wear performance of HFCVD nanocrystalline diamond coated silicon nitride ceramics |
| CS Abreu, M Amaral, AJS Fernandes, FJ Oliveira, RF Silvab, JR Gomes |
Diamond and Related Materials Volume 15, Issues 4-8, April-August 2006, p. 739-744
|
| Paper # 474 | Influence of loading, contamination and additive on the wear of a metallic pair under rotating and reciprocating lubricated sliding |
| MM Maru, DK Tanaka |
Journal of the Brazilian Society of Mechanical Sciences and Engineering Vol. XXVIII, No. 3, July-September 2006
|
| Paper # 495 | Modeling of the voltage-controlled friction effect |
| M Yonggang, J Hongjun, C Qiuying |
Science in China Series A-Mathematics, 2002
|
| Paper # 505 | Reciprocating sliding behaviour of self-mated amorphous diamond-like carbon coatings on Si3N4 ceramics under tribological stress |
| M Vila, CS Abreu, E Salgueiredo, FA Almeida, AJS Fernandes, FM Costa, JR Gomes, RF Silva |
Thin Solid Films Volume 515, Issue 4, 5 December 2006, p. 2192-2196
|
| Paper # 514 | Sliding wear resistance of metal matrix composite layers prepared by high power laser |
| V Ocelík, D Matthews, JTM De Hosson |
Surface and Coatings Technology Volume 197, Issues 2-3, 22 July 2005, p. 303-315
|
| Paper # 515 | Solid Freeform Fabrication of In Situ SiC/C Thermocouples in Macrocomponents |
| L Sun, LL Shaw |
Metallurgical and Materials Transactions A, Volume 30, Number 9, 1 September 1999, p. 2549-2551
|
| Paper # 536 | The Effect of Heat Treatment on Sliding Wear Behaviour of a Zinc-Based Alloy Containing Nickel and Silicon |
| BK Prasad |
Tribology Letters Issue Volume 15, Number 3 / October, 2003 p. 333-341
|
| Paper # 549 | Thermo-mechanical model to predict the tribological behaviour of the composite PEEK-CF 30/steel pair |
| JP Davim, R Cardoso |
Industrial Lubrication and Tribology, Oct 2005 Volume: 57 Issue: 5 Page: 181 - 186
|
| Paper # 550 | Ti-6Al-4V strengthened by laser melt injection of WCp particles |
| JA Vreeling, V Ocelik, JTM Hosson |
Acta Materialia, Volume 50, Number 19, 14 November 2002, pp. 4913-4924
|
| Paper # 558 | Tribological Behavior of Patterned PVD TiN Coatings on M2 Steel |
| M Hua, HY Ma, CK Mok, J Li |
Tribology Letters Volume 17, Number 3 / October, 2004 p. 645-653
|
| Paper # 560 | Tribological behaviour of colloidally processed sialon ceramics sliding against steel under dry conditions |
| P Reis, JP Davim, X Xu, JMF Ferreira |
Tribology Letters Volume 18, Number 3 / March, 2005 p. 295-301
|
| Paper # 563 | Tribological behaviour of Si3N4–BN ceramic materials for dry sliding applications |
| JM Carrapichano, JR Gomes, RF Silva |
Wear Volume 253, Number 9, November 2002, pp. 1070-1076
|
| Paper # 564 | Tribological behaviour of the composite PEEK-CF30 at dry sliding against steel using statistical |
| JP Davim, R Cardoso |
Materials and Design, 2006 - Volume 27, Issue 4, 2006, p. 338-342 - Elsevier
|
| Paper # 565 | Tribological comparative study of conventional and composite materials in biomedical applications |
| N Marques, JP Davim |
Engineering Materials 2002
|
| Paper # 571 | Wear behavior on advanced structural ceramics: a-sialon matrix reinforced with ß-sialon fibers |
| P Reis, V Filho, JP Davim, X Xu, JMF Ferreira |
Materials & Design Volume 28, Issue 4, 2007, p. 1343-1347
|
| Paper # 576 | Wear of ceramic particle-reinforced metal-matrix composites |
| ZF Zhang, LC Zhang, YW Mai |
Journal of Materials Science Issue Volume 30, Number 8 / January, 1995 p. 1967-1971
|
| Paper # 610 | HFCVD nanocrystalline diamond coatings for tribo-applications in the presence of water |
| CS Abreu, M Amaral, FJ Oliveira, JR Gomes |
Diamond and Related Materials Volume 18, Issues 2-3, February-March 2009, p. 271-275
|
| Paper # 615 | Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine |
| M Bezzazi, A Khamlichi, A Jabbouri, P Reis, JP Davim |
Materials and Design Volume 28, Issue 7, 2007, p. 2148-2153
|
| Paper # 616 | Temperature field and wear prediction for UHMWPE acetabular cup with assumed rectangular surface texture |
| GN Dong, M Hua, J Li, KB Chuah |
Materials and Design Volume 28, Issue 9, 2007, p. 2402-2416
|
| Paper # 617 | Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks |
| X LiuJie, JP Davim, R Cardoso, |
Journal of Materials Processing Technology Volume 189, Issues 1-3, 6 July 2007, p. 374-378
|
| Paper # 618 | A note on tribological behaviour of a-sialon/steel couples under dry conditions |
| P Reis, JP Davim, X Xu, JMF Ferreira |
Materials and Design Volume 28, Issue 4, 2007, p. 1343-1347
|
| Paper # 619 | Tribological properties of the directionally oriented warp knit GFRP composites |
| MT Mathew, NV Padaki, LA Rocha, JR Gomes, R Alagirusamy, B L Deopura, R Fangueiro, |
Wear Volume 263, Issues 7-12, 10 September 2007, p. 930-938
|
| Paper # 620 | Relationship between test severity and wear mode transition in micro-abrasive wear tests |
| RC Cozza, JDB de Mello, DK Tanaka, RM Souza, |
Wear Volume 263, Issues 1-6, 10 September 2007, p. 111-116
|
| Paper # 656 | TiCxOy thin films for decorative applications: Tribocorrosion mechanisms and synergism |
| MT Mathew, E Ariza, LA Rocha, AC Fernandes and F Vaz |
Tribology International, Volume 41, Issue 7, July 2008, p. 603-615
|
| Paper # 657 | Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions |
| J Paulo Davim, Edgar Santos, Catarina Pereira, JMF Ferreira |
Industrial Lubrication and Tribology 2008 Volume: 60 Issue: 4 Page: 178 - 182
|
| Paper # 658 | Friction and wear behavior of SUS 304 austenitic stainless steel against Al2O3 ceramic ball under relative high load |
| Meng Hua, Wei Xicheng and Li Jian |
Wear Volume 265, Issues 5-6, 25 August 2008, p. 799-810
|
| Paper # 659 | HFCVD nanocrystalline diamond coatings for tribo-applications in the presence of water |
| CS Abreu, M Amaral, FJ Oliveira, JR Gomes and RF Silva |
Diamond and Related Materials, In Press, Corrected Proof, Available online 8 September 2008,
|
| Paper # 660 | The Influence on Boundary Friction of the Permeability of Sintered Bronze |
| Pär Marklund , Kim Berglund, Roland Larsson |
Tribology Letters Issue Volume 31, Number 1 / July, 2008 p. 1-8
|
| Paper # 692 | Friction-induced microstructure evolution of SUS 304 meta-stable austenitic stainless steel and its influence on the wear behaviour |
| Xicheng Wei, Meng Hua, Zongyu Xue, Zhi Gao, Jian Li |
Wear of Materials 2009
|
| Paper # 693 | Dry sliding wear of Al alloy/SiC functionally graded composites: influence of processing conditions |
| AC Vieira, PD Sequeira, JR Gomes, LA Rocha |
Wear of Materials 2009
|
| Paper # 723 | Dry sliding wear of Al alloy/SiCp functionally graded composites: Influence of processing conditions |
| AC Vieira, PD Sequeira, JR Gomes, LA Rocha |
Wear Volume 267, Issues 1-4, 15 June 2009, p. 585-592
|
| Paper # 733 | Sliding wear characteristics of grey cast iron as influenced by sliding speed, load and environment |
| BK Prasad |
Tribology - Materials, Surfaces & Interfaces, Volume 2, Number 3, September 2008, 128-138(11)
|
| Paper # 738 | Lubricant ageing effects on the friction characteristics of wet clutches |
| K Berglund, P Marklund, R Larsson |
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 224, Number J7, 2010, pp. 639-647
|
| Paper # 754 | Effects of Some Solid Lubricants Suspended in Oil Toward Controlling the Wear Performance of a Cast Iron |
| BK Prasad, S Rathod, MS Yadav |
Journal of Tribology 2010 Volume 132, Issue 4
|
| Paper # 760 | Fabrication of WC/Fe composite coating by centrifugal casting plus in-situ synthesis techniques |
| L Niu, Y Xu |
Surface and Coatings Technology, 2010 Volume 210, Issue 12, p. 1587-1597
|
| Paper # 785 | Sliding wear resistance of Al-alloy particulate composites: An assessment on its efficacy |
| R Dasgupta |
Tribology International 2010 Volume 43, Issues 5-6, p. 951-958
|
| Paper # 791 | The Influence of Lead Suspension in Oil Lubricant on the Sliding Wear Behaviour of Cast Iron |
| BK Prasad, S Rathod, MS Yadav |
Tribology Letters 2010 Volume 37, Number 2, p. 289-299
|
| Paper # 792 | Tribocorrosion Behaviour of TiCxOy Thin Filmsin Bio-fluids |
| MT Mathew, E Ariza, LA Rocha, F Vaz |
Electrochimica Acta 2010 Volume 56, Issue 2, p. 929-937
|
| Paper # 798 | Tribological characterisation of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effect of sliding distance |
| S Kanagaraj, MT Mathew, A Fonseca |
International Journal of Surface Science and Engineering Volume 4, Number 4-6/2010, p. 305 - 321
|
| Paper # 800 | Tribological, rheological and mechanical characterization of polymer blends for ropes and nets |
| MT Mathew, J Novo, LA Rocha, JA Covas |
Tribology International 2010, Volume 43, Issue 8, p. 1400-1409
|
| Paper # 801 | Wear mechanisms and microstructure of pulsed plasma nitrided aisi h13 tool steel |
| MV Leite, CA Figueroa, SC Gallo, AC Rovani |
Wear 2010 Volume 269, Issues 5-6, p. 466-472
|
| Paper # 807 | ESTUDO DE DISPOSITIVOS NÃO-LINEARES PARA AMORTECIMENTO DE VIBRAÇÕES EM SISTEMAS DINÂMICOS |
| A Marques Barbosa |
Horizonte Científico, Vol. 5, Nº 2 (2011)
|
| Paper # 808 | Sliding Wear Behavior of Cast Iron: Influence of MoS 2 and Graphite Addition to the Oil Lubricant |
| BK Prasad, S Rathod, MS Yadav |
Journal of Materials Engineering and Performance Volume 20, Number 3, 445-455
|
| Paper # 838 | Effects of the Pin-on-Disc Parameters on the Wear of Alumina |
| NR Tedesco, EMJA Pallone |
Advances in Science and Technology (Volume 65) Pages 39-44
|
| Paper # 848 | Preparation of in situ (Fe, Cr) 7 C 3/Fe composite coating by centrifugal casting |
| L Niu, Y Xu, H Wu |
Surface Engineering, Volume 27, Number 8, September 2011 , pp. 587-590
|
