Publications for TE 77 High Frequency Friction Machine


Paper # 1 A Reciprocating Wear Test for Evaluating Boundary Lubrication
Sheasby J S, Caughlin T A, Blahey A G, Laycock K F,
Tribology International, 1990, 23(5), p. 301-307.


Paper # 2 Testing EP and Anti-Wear Performance of Gear Lubricants
Alliston-Greiner A F,
Proc. I. Mech. E., J. Aerospace Eng., 1991, 205, p. 89-101.


Paper # 3 Compositional Changes in Lubricated Sliding Metal Surfaces Related to Seizure
Johanssen E, Hogmark S, Nilsson H, Redelius P,
Proc. 5th Int. Congress on Tribology, Eurotrib 1989, Vol. 1, p. 174-180.


Paper # 4 Modifications of Electron Properties of Friction Surfaces in Boundary Lubrication
Morizur M F, Briant J,
Proc. I. Mech. E., Tribology - Friction, Lubrication and Wear, Fifty Years On, 1987, p. 447-454.


Paper # 5 Electrical Phenomena Associated with Boundary Lubricated Friction
Morizur M F, Briant J,
Proc. 5th Int. Congress on Tribology, Eurotrib 1989, Vol. 5, p. 272-279.


Paper # 6 In-Situ Electro-charging for Friction Reduction and Wear Resistant Film Formation
Tung S C, Wang S-C S,
STLE Tribology Conference, Toronto, October 7-10, 1990.


Paper # 7 The Transition Between Mild and Severe Wear for Boundary Lubricated Steels
Samuels B, Richards M N,
ASME Journal Of Tribology, 1991, 113, p. 65-72.


Paper # 8 Sliding Friction and Wear Behaviour of Several Nickel Aluminide Alloys Under Dry and Lubricated Conditions
Blau P J, De Vore C E,
Tribology International, 1990, 23(4), p. 226-234.


Paper # 9 Addition of Solid Lubricants to Grease: Influence of Solid Content and Powder Characteristics on Sliding Friction and Wear
Fatkin J, Cron A,
ITC, Nagoya, 1990, 2F1-2, p.1101-1106.


Paper # 10 Routine Engine Tests - Can We Reduce Their Number ?
Plint M A, Alliston-Greiner A F,
Petroleum Review, July 1990, p. 368-370.


Paper # 11 Development of Fuel Wear Tests Using the Cameron-Plint High Frequency Reciprocating Machine
Kanakia M D, Cuellar Jr J P, Lestz S J,
Belvoir Fuels and Lubricants Research Facility SwRI Report No. BFLRF 262, May 1989.


Paper # 12 Test Procedure for Rapid Assessment of Frictional Properties of Engine Oils at Elevated Temperatures
Plint A G, Plint M A,
Tribology International, 1984, 17(4), p. 209-213.


Paper # 13 A New Technique or the Investigation of Stick-Slip
Plint A G, Plint M A,
Tribology International, 1985, 18(4), p. 247-249.


Paper # 14 Development of Wear-Resistant Ceramic Coatings for In-Cylinder Diesel Engine Components
Naylor M G S, Fear M P,
Presented at Coatings for Advanced Heat Engines Workshop, Castine, Maine, August 6-9 1990.


Paper # 15 Wear Resistant Ceramic Coatings
Naylor M G S,
Presented at US Department of Energy Annual Automotive Technology Development Contractor's Coordination Meeting, Dearborn, Michigan, October 22-25, 1990., SAE P-243, 273-281.


Paper # 16 Fuel Lubricity Requirements for Diesel Injection Systems
Lacey P I, Lestz S J,
Belvoir Fuels and Lubricants Research Facility SwRI Report No. BFLRF 270, Feb 1991.


Paper # 17 Overbased Lubricant Detergents - A Comparative Study of Conventional Technology and a New Class of Product
O'Conner S P, Crawford J, Cane C,
Proc. 7th International Colloquium, Automotive Lubrication, Esslingen, January 1990, Paper 12.15, 1-16.


Paper # 18 A Tribological Study of Overbased Detergents
O'Conner S P, Crawford J, Moore A J,
Proc. 8th International Colloquium, Tribology 2000, Esslingen, January 1992, Paper 7.7, 1-13.


Paper # 19 Untersuchung zur Tribologie von Flugturbinenolen unter Mischreibungsbedingungen (Tribological Investigations of Aviation Turbine Oils under Mixed Lubrication Conditions)
Schroeder H, Jantzen E,
Proc. 8th International Colloquium, Tribology 2000, Esslingen, January 1992, Paper 19.10, 1-16.


Paper # 20 The Removal of Substrate Material through Thick Zinc Dithiophosphate Anti-Wear Films
Bell J C, Delargy K M, Seeney A M,
Proc. Leeds-Lyon Symposium, Wear Particles, Dowson et al. (eds), 1992, Elsevier, Paper IX(ii), p. 387-396.


Paper # 21 Lubrication Influences on the Wear of Piston-Ring Coatings
Bell J C, Delargy K M,
Proceedings of the 16th Leeds-Lyon Symposium, Mechanics of Coatings, 1989, p. 371-377.


Paper # 22 The Use of a Laboratory Wear Simulation Technique for the Development of Marine Cylinder Lubricants
Davis F A, Moore A J, Pridmore S,
Presented at CIMAC '93, 1993.


Paper # 23 The Development of a Reciprocating Rig Technique to Assess the Stick-Slip Properties of Slideway Lubricants
Coates D A,
I. Mech. E. The Mission of Tribology Research, December 1992 (unpublished).


Paper # 24 Bench Wear Testing of Engine Power Cylinder Components
Patterson D J, Hill S H, Tung S C,
Lubrication Engineering, 1993, 49(2), p. 89-95.


Paper # 25 Diamond-like Carbon Coatings on Ti-6Al-4V
Kustas F M, Misra M S, Wei R, Wilbur P J,
Tribology Transactions, 1993, 36(1), p.113-119.


Paper # 26 Antiwear Mechanism of Zinc Dialkyl Dithiophosphates Added to Paraffinic Oil in the Boundary Lubrication Condition
So H, Lin Y C, Huang G G S, Cherney T S T,
Wear 1993, 166, p.17-26.


Paper # 27 Fuel Efficiency Screening Tests for Automotive Engine Oils
Moore A J,
SAE 932689, 1993 (also in SAE SP-996, Tribological Insights and Performance Characteristics of Modern Engine Lubricants)


Paper # 28 The Impact of Organomolybdenum Compounds on The Frictional Characteristics of Crankcase Engine Oils
Stipanovic A J, Schoonmaker J P,
SAE 932779, 1993 (also in SAE SP-996, Tribological Insights and Performance Characteristics of Modern Engine Lubricants)


Paper # 29 A Retrospective Survey of the Use of Laboratory Tests to Simulate Internal Combustion Engine Materials Tribology Problems
Blau P J,
ASTM STP 1199, Tribology: Wear Test Selection for Design and Application, Ruff A. W. and Bayer R. G. (eds), 1993.


Paper # 30 Microstructures and Tribological Characteristics of Electron-Beam Co-Deposited Ag/Mo Thin Film Coatings
Tung S C, Cheng Y-T,
Wear 1993, 162-164, p. 763-772.


Paper # 31 A New Technique to Enhance Film-Coating Process by Electrochemical Reaction in Oil-Based Media
Wang S-C S, Tung S C,
STLE Trans., 1994, 37(1), p. 175-181.


Paper # 32 Extreme Pressure and Anti-Wear Properties of Lubricants: A Critical Study of Current Test Methods and Suggestions for the Future
Plint M A, Alliston-Greiner A F,
ASTM STP 1199, Tribology: Wear Test Selection for Design and Application, Ruff A. W. and Bayer R. G. (eds), 1993.


Paper # 33 Surface and Tribological Characterization of Coatings for Friction and Wear Reduction
Simko S J, Militello M C, Tung S C,
SAE 932787, 1993. Also SAE SP-996, Tribological Insights and Performance Characteristics of Modern Engine Lubricants SAE Technical Papers Document Number: 932787


Paper # 34 A Diamond-like Carbon Film for Wear Protection of Steel
Harris S J, Tung S C, Simko M C,
International Conference on Metallurgical Coatings and Thin Films, San Diego, 1993.


Paper # 35 Development of a Bench Wear Test for the Evaluation of Engine Cylinder Components and the Correlation with Engine Test Results
Hartfield-Wünsch S E, Tung S C, Rivard C J,
SAE 932693, 1993 (also in SAE SP-996, Tribological Insights and Performance Characteristics of Modern Engine Lubricants)


Paper # 36 Polymer Esters and Their Synergy with ZDDP - A Possibility to Reduce ZDDP Content in Lubricants?
Wallfahrer U,
9th International Colloquium, Ecological and Economical Aspects of Tribology, Esslingen, Paper 11.14, 1-10.


Paper # 37 Development of a Laboratory Test to Predict Lubricity Properties of Diesel Fuels and Its Application to the Development of Highly Refined Diesel Fuels
Spikes H A, Meyer K, Bovington C, Caprotti R,, Krieger K,
9th International Colloquium, Ecological and Economical Aspects of Tribology, 1994, Paper 3.11, 1-16.


Paper # 38 Wear of spheroidal graphite cast irons for tractor drive train components
M Beltowksi, PJ Blau, J Qu
Wear Volume 267, Issues 9-10, 9 September 2009, p. 1752-1756


Paper # 39 Evaluation of a High Frequency Reciprocating Wear Test for Measuring Diesel Fuel Lubricity
Hadley J W, Owen G C, Mills B,
SAE 932692, (also in SAE SP-996)


Paper # 40 Gear Box Oil Test Procedures: A Critical Study
Alliston-Greiner A F, Plint M A,
CEC/93/TL02, Proceedings of 4th International Symposium on the Performance Evaluation of Automotive Fuels and Lubricants, 1993.


Paper # 41 The Investigation of ZDTP Anti-Wear Additive Surface Morphologies by Coupling Atomic Force Microscopy with Friction Measurements
Mowlem J, Laurion T, Landol M,
STLE Preprint 94-PS-3G-6, 49th STLE Annual Meeting, 1994.


Paper # 42 Development of a Lubricity Test Based on the Transition from Boundary Lubrication to Severe Adhesive Wear in Fuels
Lacey P I,
STLE Preprint 94-AM-5J-1, 49th STLE Annual Meeting, Pittsburg, 1994.


Paper # 43 Scale Effects in Sliding Friction: An Experimental Study
Blau P J,
Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer I. L. and Pollock H. M. (eds), Kluwer Academic Publishers, 1992.


Paper # 44 Wear-Reducing Surface Films Formed by a Fluorinated Sulfonamide Additives in a Chlorotrifluoroethylene-Based Fluid
Cavdar B, Sharma S K, Gschwender L J,
STLE Preprint 94-AM-3G-1, 49th STLE Annual Meeting, Pittsburg, 1994.


Paper # 45 Wear Control in Automotive Diesel Engines
Cooper D, Moore A J,
Austrib '94, 4th International Tribology Conference, Perth, 1994.


Paper # 46 The Influence of Boundary Films on Lubricant Anti-Scuff Performance
Cooper D, Moore A J,
21st Leeds-Lyon Symposium on Tribology, Lubricants and Lubrication, Dowson et al. (eds), Elsevier, 1995, p. 617-633.


Paper # 47 The Composition and Structure of Model Zinc Dialkyldithiophosphate Anti-Wear Films
Bell J C, Delargy K M,
6th International Congress on Tribology, Eurotrib 93, 1993.


Paper # 48 Application of Thin Layer Activation to Lubricant Evaluation: On-Line Monitoring of Wear on a Reciprocating Test Bench
Delvigne T, Oxorn K,
Industrial Diagnostic Services Report, 6, rue J. Lenoir, B-1348 Louvain-la-Neuve, Belgium, 1993.


Paper # 49 Wear of Piston Rings and Liners By Laboratory Simulation
Ralph Slone, Donald J Patterson, Kevin M Morrison, George B Schwartz
SAE Paper - 890146 - 02/01/1989


Paper # 50 Study of Tribochemical Film Formation using X-Ray Absorption and Photoelectron Spectroscopies
Kasrai M, Fuller M, Scaini M, Yin Z, Brunner R W, Bancroft G M, Fleet M E, Fyfe K, Tan K H,
21st Leeds-Lyon Symposium on Tribology, Lubricants and Lubrication, Dowson et al. (eds), Elsevier, 1995, p. 659-669.


Paper # 51 On the Prediction of the Anti-Wear Performance of an Engine Oil
Jarnias F, Du Parquet J,
Proceedings of the XI NCIT, January 22-25, 1995, p. 409-414.


Paper # 52 Friction and Wear of Carbon-Graphite Materials Against Metal and Ceramic Counterfaces
Blau P J, Martin R L,
Tribology International, 1994, 27(6), p. 413-422.


Paper # 53 Machines and Methodologies for Wear Testing Extreme Pressure and Anti-Wear Properties of Lubricants
Plint A G,
Proceedings of the XI NCIT, January 22-25, 1995, p. 375-386.


Paper # 54 Dry Lubrication Using a Composite Coating
Ebdon P R,
Proc. I. Mech. E., C130/87, p.537-542


Paper # 55 Electroless Nickel/PTFE Composites
Ebdon P R,
SAE 880875, 24th Annual Aerospace/Airline Plating and Metal Finishing Forum, 1988.


Paper # 56 Laboratory Screening Tests for Low Sulphur Diesel Fuel Lubricity
Cooper D,
Lubrication Science, 1995, 7 (2), p. 133-148.


Paper # 57 Microstructure and Mechanical Properties of the Plasma Sprayed Mo and Co Alloy Coating Layers (IN KOREAN)
Nam T-H, Hur G-C, Lee S W, Ha G-H, Kim B-K,
Journal of the Korean Inst. Metals and Materials, 1995, 33 (4), p. 556-562.


Paper # 58 Wear with Low-Lubricity Fuels I. Development of a Wear Mapping Technique
Lacey P I,
Wear 1993, 160, p. 325-332.


Paper # 59 Wear Behaviour of Plasma-Sprayed Partially Stabilized Zirconia on a Steel Substrate
Ahn H-S, Kwon O-K,
Wear 1993, 162-164, p. 636-644.


Paper # 60 The Influence of Interfacial Potential on Friction and Wear in an Aqueous Drilling Mud
Brandon N P, Wood R J K,
Wear 1993, 170, p. 33-38.


Paper # 61 Tribochemistry of a PFPAE Fluid on M-50 Surfaces by FTIR Spectroscopy
Liang J C, Helmick L S,
Tribology Transactions, 1996, 39 (3), p. 705-709.


Paper # 62 Effect of Humidity on Friction and Wear for a Linear Perfluoropolyalkylether Fluid under Boundary Lubrication Conditions
Helmick L S, Sharma S K,
Lubrication Engineering, 1996, 52 (6), p. 437-442.


Paper # 63 Bench Wear Testing of Common Gasoline Engine Cylinder Bore Surface/Piston Ring Combinations
Hill S H, Hartfield-Wünsch S E, Tung S C,
STLE Preprint 96-AM-6C-2, 1996, 1-7.


Paper # 64 The Influence of Composition on the Lubricity of Diesel Fuels
Hadley J W, Mills B,
CEC/93/EF12, 4th International Symposium on the Performance Evaluation of Automotive Fuels and Lubricants, 1993.


Paper # 71 Prediction of ASTM Sequence VI and VIA Fuel Economy Based on Laboratory Bench Tests
Gangopadhay A K, Sorab J, Willermet P A, Schriewer K, Fyfe K, Lai P K S,
SAE 961140, 1996.


Paper # 87 Frictional Properties of Organomolybdenum Compounds in the Presence of ZDTPs under Sliding Conditions
Muraki M, Wada H,
in "Lubricants and Lubrication", Dowson et al. eds., Elsevier, 1995, 409-422.


Paper # 88 Accelerated Wear of Ceramics Assisted by Tribochemical Effects
Kaur R G, Stolarski T A, Coates D A, Gelder A,
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.


Paper # 93 Influences of Lubricant Properties on ASTM Sequence VI and Sequence VI-A Fuel Efficiency Performance
Moore A J,
SAE Paper 961138, 1996, 1-12.


Paper # 94 Reliable Model of Lubricant-Related Friction in Internal Combustion Engines
Benchaita M T, Lockwood F E,
Lubrication Science, 5(4), 1993, 259-280.


Paper # 96 Effects of Surface Grinding Conditions on the Reciprocating Friction and Wear Behaviour of Silicon Nitride
Blau P J, Martin R L, Zanoria E S,
Wear 203-204, 1997, 648-657.


Paper # 99 Tribological Behaviour of Plasma-Sprayed Zirconia Coatings
Ahn H-S, Kim J-Y, Lim D-S,
Wear 203-204, 1997, 77-87.


Paper # 101 Prediction of the Lubrication and Wear of Piston Rings - Theoretical Model
Priest M, Dowson D, Taylor C M,
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.


Paper # 102 The Utilization of Novel Bench Screening Techniques in the Development of Antiwear Additives for Lubricants
Migdal C A, Rowland R G, Baranski J R,
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.


Paper # 103 Sliding Wear of Plasma-Sprayed Chromium Oxide-Silica Coating
Ahn H-S, Lee S K,
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.


Paper # 108 Mechanisms of Tribochemical Film Formation: Stability of Tribo- and Thermally- Generated ZDDP Films
Bancroft G M, Kasrai M, Fuller M, Yin Z, Fyfe K, Tan K H,
Tribology Letters March 1997 Volume 3 – No 1 - 47-51


Paper # 109 Low ZDDP High Performance Semisynthetic Automotive Engine Oils Using Polymer Esters as an Antiwear Booster
Wallfahrer U, Bowen L,
Lubrication Engineering, 53(12), 1997, 23-28.


Paper # 110 Application of Soft X-Ray Absorption Spectroscopy in Chemical Characterization of Antiwear Films Generated by ZDDP Part I: The Effects of Physical Parameters.
Yin K, Kasrai M, Fuller M, Bancroft G M, Fyfe K, Tan K H,
Wear 202, 1997, 172-191.


Paper # 111 Application of Soft X-Ray Absorption Spectroscopy in Chemical Characterisation of Antiwear Films Generated by ZDDP Part II: The Effects of Detergents and Dispersants.
Yin K, Kasrai M, Fuller M, Bancroft G M, Fyfe K, Colaianni M L, Tan K H,
Wear 202, 1997, 192-201.


Paper # 112 Chemical Characterization of Tribochemical and Thermal Films Generated from Neutral and Basic ZDDPs using X-ray Absorption Spectroscopy
Fuller M, Yin Z, Kasrai M, Bancroft G M, Yamaguchi E S, Ryason P R, Willermet P A, Tan K H,
Tribology International, 30, 1997, 305-315.


Paper # 114 Tribological Properties of Fire-Resistant, Non-flammable, and petroleum-Based Hydraulic Fluids
Lacey P I, Naegeli D W, Wright B R,
In Tribology of Hydraulic Pump Testing, ASTM STP 1310, Totten G. E., Kling G. and Smolenski D, J, eds., ASTM, 1996.


Paper # 115 Bench Wear and Single-Cylinder Engine Evaluations of High Temperature Lubricants for U.S. Army Ground Vehicles
Lacey P I, Frame E A, Yost D M,
Belvoir Fuels and Lubricants Research Facility SwRI Report No. BFLRF 291, September 1994.


Paper # 118 A Study of Boundary Lubrication Thin Films Produced from a Perfluoropolyalkylether Fluid on M-50 Surfaces. 1. Film Species Characterization and Mapping Studies
Liang J C, Cavdar B, Sharma S K,
Tribology Letters, 3, 1997, 107-112.


Paper # 119 Wettability Aspects of Friction and Wear reduction by a Fluorinated Sulphonamide Additive in a Chlorotrifluoroethylene-based Fluid
Cavdar B, Sharma S K, John P,
Tribology International, 28(8), 1995, 501-506.


Paper # 134 Testing Extreme Pressure and Anti-Wear Performance of Crankcase and Gearbox Lubricants
Alliston-Greiner A F, Plint A G, Plint M A,
Proceedings of the XII NCIT, January 1998, p. 672-686.


Paper # 135 Wear Testing Methods and Their Relevance to Industrial Wear Problems
Gee M G, Owen-Jones S,
NPL (National Physical Laboratory) Report CMMT (A)92, December 1997.


Paper # 143 A Model Study of Lubricant Additive Reactions in the Presence of Methanol
Olsson B, Mattsson L, Nilsson P H, Otterholm B, Wirmark G,
Proc. Leeds-Lyon Symposium, Vehicle Tribology, Dowson et al. (eds), 1991, Elsevier Tribology Series, 18, Paper XVI(ii), p. 429-437.


Paper # 147 Solution Decomposition of Zinc Dialkyl Dithiphosphate and its Effect on Antiwear and Thermal Film Formation Studies by X-Ray Absorption Spectroscopy.
Suominen Fuller M L, Kasrai M, Bancroft G M, Fyfe K, Tan K H,
Tribology International, 31 (10), 1998, 627-644.


Paper # 148 The Sliding Wear Resistance and Frictional Characteristics of Surface Modified Aluminium Alloys Under Extreme Pressure
Dearnley P A, Gummersbach J, Weiss H, Ogwu A A, Davies T J,
Wear 225-229 (1999), 127-134.


Paper # 152 A Qualitative Empirical Model of Cylinder Bore Wear
Becker E P, Ludema K C,
Wear 225-229 (1999), 387-404.


Paper # 154 Temperature Effects on the Wear Behaviour of Particulate Reinforced Al-Based Composites
Martin A, Rodriguez J, Llorca J,
Wear 225-229 (1999), 615-620.


Paper # 155 Tribological Behaviour of Plasma-Sprayed Chromium Oxide Coating
Ahn H-S, Kwon O-K,
Wear 225-229 (1999), 814-824.


Paper # 156 Scuffing and Wear Behaviour of Aluminium Piston Skirt Coatings Against Aluminium Cylinder Bore
Wang Y, Tung S C,
Wear 225-229 (1999), 1100-1108.


Paper # 157 Development and Use of ASTM Standards for Wear Testing
Blau P J, Budinski K G,
Wear 225-229 (1999), 1159-1170.


Paper # 159 Effects of Whisker Distribution and Sintering Temperature on Friction and Wear of Si3N4-Whisker-Reinforced Si3N4-Composites
Liang Y N, Lee S W, Park D S,
Wear 225-229 (1999), 1327-1337.


Paper # 160 Reciprocating Friction and Wear Behaviour of a Ceramic-Matrix Graphite Composite for Possible Use in Diesel Engine Valve Guides
Blau P J, Dumont B, Braski D N, Jenkins T, Zanoria E S, Long M C,
Wear 225-229 (1999), 1338-1349.


Paper # 197 Using Fiber Optics and Laser Fluorescence for Measuring Thin Oil Films With Application to Engines
Dana E Richardson, Gary L Borman
SAE Paper - 912388 - 10/01/1991


Paper # 220 Use of Low-Viscosity, Low-Volatility Basestocks in Formulation of High Performance Motor Oils
T E Kiovsky, N C Yates, J R Bales
SAE Paper - 922348 - 10/01/1992


Paper # 227 Stuck Servovalves in Aircraft Hydraulic Systems
Sharma S K, Snyder CE, Gschwender L J, Liang J C, Schreiber B F,
STLE Lubrication Engineering, 55(7), 1999, 27-32.


Paper # 228 Influence of Potential on the Friction and Wear of Mild Steel in a Model Aqueous Lubricant
Brandon N P, Bonanos N, Fogarty P O, Mahmood M N, Moore A J, Wood R J K,
J. App. Eletrochem, 23, 1993, 456.


Paper # 230 On the Use of Laboratory Friction Tests to Select Lubricants for Cold Rolling of Aluminium Alloys
Deneuville P,
STLE Lubrication Engineering, 55(8), 1999, 28-32.


Paper # 232 The Combined Effects of ZDDP, Surface Texture and Hardness on the Running-in of Ferrous Metals
Do H, Lin R C,
Tribology International, 32(5), 1999, 243-253.


Paper # 233 Bench Test Study of Piston Flank and Piston Groove Interaction
Barrell D J W, Priest M, Taylor C M,
Proc. Leeds-Lyon Symposium, Vehicle Tribology, Dowson et al. (eds), 1999, Elsevier Tribology Series, 36, p. 343-351.


Paper # 234 Piston Ring / Ring Groove Interactions in Internal Combustion Engines
Barrell D J W, Priest M, Taylor C M,
presented at "Mission of Tribology Research 8", Institution of Mechanical Engineers, London, 2nd December 1999, Paper 9.


Paper # 248 Tribological properties of ionic liquids as lubricants and additives. Part 1: synergistic tribofilm formation between ionic liquids and tricresyl phosphate
MF Fox, M Priest
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Volume 222, Number 3 / 2008 p. 291-303


Paper # 275 Tribological performance of an Al–Si alloy lubricated in the boundary regime with zinc dialkyldithiophosphate and molybdenum dithiocarbamate additives
X Xia, A Morina, A Neville, M Priest
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Volume 222, Number 3 / 2008 p. 305-314


Paper # 276 Tribological properties of diamond-like carbon coatings in lubricated automotive applications
H Renondeau, BL Papke, M
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Volume 223, Number 3 / 2009 p. 405-412


Paper # 277 Tribological evaluation of aluminum and magnesium sheet forming at high temperatures
MD Hanna
Wear Volume 267, Issues 5-8, 15 June 2009, p. 1046-1050


Paper # 279 The Two-layer Structure of Zndtp Tribofilms
Martin J-M, Grossiord C, Le Mogne T, Bec S,TonckA,
Tribology International, 34 (2001) 523-530.


Paper # 280 Additive Influence on Wear and Friction Performance of Environmentally Adapted Lubricants
Waara P, Hannu J, Norrby T, Byheden A,
Tribology International, 34 (2001) 547-556.


Paper # 282 A Review of ZDDPs: Characterisation and Role in Lubricating Oil
Barnes A, Bartle K, Thibon V,
Tribology International, 34 (2001) 389-395.


Paper # 283 The Influence of Honing on the Wear of Ceramic Coated Piston Rings and Cylinder Liners
Radil K,
Lubrication Engineering, Volume 58, Issue 7, July 2001.


Paper # 284 Wear and Scuffing Characteristics of Composite Polymer and Nickel/ceramic Composite Coated Piston Skirts Against Aluminium and Cast Iron Cylinder Bores
Wang Y, Brogan K, Tung S,
Wear 250 (2001) 706-717.


Paper # 285 Tribological Evaluation of Oil Pump Relief Valve Coatings Compatible with an Aluminum Oil Pump Body
Wang Y, Brogan K, Tung S,
Wear 250 (2001) 690-705.


Paper # 294 Tribological Characteristics of WC-Ni and WC-Co Cemented Carbide in Dry Reciprocating Sliding Contact
K Bonny, P De Baets, J Vleugels
Tribology Transactions, Volume 52, Issue 4 July 2009 , p. 481 - 491


Paper # 302 Tribological Characteristics of Electrolytic Coatings for Aluminum Engine Cylinder Lining Applications
Amit Datta, John Carpenter, Peter J Blau, Ronald D Ott
SAE Paper - 2002-01-0490 - 03/04/2002


Paper # 311 Theoretical and Experimental Investigations of Oil Films for Application to Piston Ring Lubrication
Dana E Richardson, Gary L Borman
SAE Paper - 922341 - 10/01/1992


Paper # 315 Abrasion and Reciprocating Wear Testing of Ceramics and Hardmetals.
Gee M G, Gant A, Byrne W P, Roebuck B,
NPL Report CMMT(A)166, May 1999.


Paper # 324 Testing Extreme Pressure and Anti-Wear Performance of Crankcase and Gearbox Lubricants.
Alliston-Greiner A F, Plint A G, Plint M A,
ASTM STP 1404, American Society for Testing and Materials.


Paper # 327 Reciprocative sliding wear of ZrO2–TiCN composites against WC-Co cemented carbide
K Bonny, P De Baets, J Vleugels, A Salehi, B Lauwers
Wear Volume 265, Issues 11-12, 26 November 2008, p. 1767-1775


Paper # 329 Squeak and Rattle Behavior of Elastomers and Plastics: Effect of Normal Load, Sliding Velocity, and Environment
Martin A Trapp, Roman Pierzecki
SAE Paper - 2003-01-1521


Paper # 330 Squeak and Rattle Behavior of Filled Thermoplastics: Effect of Filler Type and Content on Acoustic Behavior
Martin A Trapp, Roman Pierzecki
SAE Paper - 2005-01-2542


Paper # 331 Statistical Methods to Formulate Belt Drive Cvt Fluids With High Friction Coefficients
William C Ward, Carlos L Cerda de Groote
SAE Paper - 2000-01-1871 - 06/19/2000


Paper # 333 The lubricity of graphite flake inclusions in sintered polyimides affected by chemical reactions at high temperatures
P Samyn, G Schoukens
Carbon Volume 46, Issue 7, June 2008, p. 1072-1084


Paper # 334 The sliding behaviour of sintered and thermoplastic polyimides investigated by thermal and Raman spectroscopic measurements
P Samyn, J Quintelier, G Schoukens, P De Baets
Wear Volume 264, Issues 9-10, 10 April 2008, p. 869-876


Paper # 335 Methods of Improving Cylinder Liner Wear
Padma Kodali, Peter How, William D McNulty
SAE Paper - 2000-01-0926 - 03/06/2000


Paper # 338 Optimization of Anti-Scuff and Film Strength Characteristics of Marine Cylinder Lubricants
S S V Ramakumar, Neelam Aggarwal, Ajay Kumar, V K Chhatwal, V Martin, B R Tyagi
SAE Paper - 2004-28-0083 - 01/16/2004


Paper # 339 Plastic Oil Rings for Diesel Engines: a Preliminary Evaluation
Joao A Cullen, Richard F Dixon, Jiubo Ma
SAE Paper - 960049 - 02/01/1996


Paper # 340 Raman Characterization of Anti-Wear Films Formed from Fresh and Aged Engine Oils
Dairene Uy, Steven J Simko, Ann E O'Neill, Ronald K Jensen, Arup K Gangopadhyay, Roscoe O Carter III
SAE Paper - 2006-01-1099


Paper # 350 Laboratory Test Rig Simulation of Bore Polish
Gondal A K, Davis F A, Eyre T S,
Materials Science and Technology January 1998 Vol 14


Paper # 355 Basic Studies on Boundary, EP and Piston Ring Lubrication Using a Special Apparatus
Mills T N, Cameron A,
ASLE Trans., 25, 1981, 117.


Paper # 356 Metallic Contact and Friction Between Sliding Surfaces
Furey M J,
ASLE Trans., 4, 1961.


Paper # 367 A Study of Break-in Film Development with Different Piston Ring Coatings and Correlation with Electrical Contact Resistance Measurements
Tung S C, Hong Gao,
Lubrication Engineering, Volume 59, Issue 9, September 2003


Paper # 368 The Tribological Behaviour of Engineering Plastics during Sliding Friction investigated with Small-scale Specimens
Zsidai L, De Baets P, Samyn P, Kalacska G, Van Peteghem A P, Van Parys F,
Wear 253 (2002) 673 - 688


Paper # 369 Tribological Behaviour of Pure and Graphite-filled Ployamides under Atmospheric Conditions
Samyn P, De Baets P, Schoukens G, Hendrickx B,
Polymer Engineering and Science Page 1477 Vol 43 No 8 August 2003


Paper # 383 An Experimental Study of the Wear Performance of NiCrBSi Thermal Spray Coatings
Rodriguez J, Martin A, Fernandez R, Fernandez J E,
Wear 255 (2003) 950 – 955


Paper # 387 Friction Characteristics of a Potential Articular Cartilage Biomaterial
Covert R J, Ott R D, Ku D N,
Wear 255 (2003) 1064 – 1068


Paper # 389 Tribological Characteristics and Surface Interaction between Piston Ring Coatings and a Blend of Energy-conserving Oils and Ethanol Fuels
Tung S C, Gao H
Wear 255 (2003) 1276 – 1285


Paper # 397 Limited Slip Wet Clutch Transmission Fluid for AWD Differentials; Part 2: Fluid Development and Verification
Ganemi B, Maki R, Ekholm K, Olsen R, Lundstrom B,
JSAE 20030121 SAE 2003-01-1981


Paper # 398 An Industrial View on Oil Specifications, Wear Testing and Hydraulic Fluids
Olsson H, Ukonsaari J,
Nortrib Conference 2002


Paper # 399 A Laboratory Simulation for Stick-Slip Phenomena on the Hydraulic Cylinder of a Construction Machine
Muraki M, Kinbara B, Konishi T,
Tribology International – Accepted for publication 21 March 2003


Paper # 401 Lubricant chemistry and tribology chemistry - boundary and extreme pressure lubrication
Cameron A
IMechE 1987


Paper # 402 A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants
John J. Truhan J J, Jun Qu, Blau P J.
Tribology International Volume 38, Issue 3 , March 2005, p. 211-218


Paper # 403 A rolling-contact device that uses the ball-on-flat testing principle
M Kalin, J Vizintin
Wear 256 (2004) 335-341


Paper # 404 Lubrication of an electroplated nickel matrix silicon carbide coated eutectic aluminium–silicon alloy automotive cylinder bore with an ionic liquid as a lubricant additive
K Mistry, MF Fox, M Priest
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Volume 223, Number 3 / 2009 p. 563-569


Paper # 405 Advantages of using the ball-on-flat device in rolling-contact testing of ceramics
M Kalin, J Vizintin
Journal of European Ceramic Society 24 (2004) 11-15


Paper # 407 Friction reduction by metal sulfides in boundary lubrication studied by XPS and XANES analyses
M I De Barros, J Bouchet, I Raoult, Th Le Mogne, J M Martin, M Kasrai and Y Yamada
Wear 254 (2003) 863-870


Paper # 409 Wear studies of (Ti–Al)N coatings deposited by reactive magnetron sputtering
K Singh, P K Limaye, N L Soni, A K Grover, R G Agrawal and A K Suri
Wear 2005 Volume 258, No11-12, 1813-1824


Paper # 410 X-ray absorption near-edge structure analysis of the chemical environment of zinc in the tribological film formed by zinc dialkyl dithiophosphate decomposition on steel
M D Pauli, T S Rufael, J K Mowlem, M Weinert, D K Saldin and W T Tysoe
Tribology International Volume 38, Issue 2 , February 2005, p. 195-204


Paper # 415 A multi-technique approach of tribofilm characterisation
C Minfray, JM Martin, C Esnouf, T Le Mogne, R Kersting, B Hagenhoff
Thin Solid Films Volumes 447-448, 30 January 2004, p. 272-277


Paper # 416 A multi-technique characterization of ZDDP antiwear films formed on Al (Si) alloy (A383) under various conditions
G Pereira, A Lachenwitzer, M Kasrai, PR Norton, TW Capehart, T Perry, Y-T Cheng, B. Frazer, P Gilbert
Tribology Letters, Volume 26, No. 2, May 2007 - 103 - 117


Paper # 418 A Review of Sub-Scale Test Methods to Evaluate the Friction and Wear of Ring and Liner Materials for Spark- and Compression Ignition Engines
PJ Blau
ORNL/TM-2001/184 – 22 January 2002


Paper # 419 A review of zinc dialkyldithiophosphates (ZDDPS): characterisation and role in the lubricating oil
AM Barnes, KD Bartle, VRA Thibon
Tribology International, Volume 34, Number 6, June 2001, pp. 389-395


Paper # 420 A scuffing test for piston ring/bore combinations Part I. Stearic acid lubrication
J Galligan, AA Torrance, G Liraut
Wear Volume 236, Number 1, December 1999 , pp. 199-209(11)


Paper # 424 Adsorption and friction in the UHV tribometer
JM Martin, T Le Mogne, C Grossiord, T Palermo
Tribology Letters Volume 3, Number 1 / March, 1997 p. 87-94


Paper # 425 Alternative and low sulfur fuel options: boundary lubrication performance and potential problems
KS Wain, JM Perez, E Chapman, AL Boehman
Tribology International Volume 38, Issue 3 , March 2005, p. 313-319


Paper # 429 Annual Technical Progress Report for Project Entitled “Impact of DME-Diesel Fuel Blend Properties on Diesel Fuel Injection Systems”
EM Chapman, A Boehman, K Wain, W Lloyd, JM Perez, D Stiver, J Conway
Report: June 2003 DOE Award Number: DE-FC26-01NT41115


Paper # 430 Antiwear film formation of neutral and basic ZDDP: influence of the reaction temperature and of the concentration
K Varlot, M Kasrai, JM Martin, B Vacher, GM Bancroft, ES Yamaguchi, P Ray Ryason
Tribology Letters 8 (2000) 9–16


Paper # 434 Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives
MI de Barros' Bouchet, JM Martin, T Le-Mogne, B Vacher
Tribology International Volume 38, Issue 3, March 2005, p. 257-264


Paper # 435 CFCC applications for diesel engine valve guides. DOE Continuous Fiber Ceramic Composite Program
D Twait, M Long
DOE Continuous Fiber Ceramic Composite Program Phase IIA/B Final Report April 14,1999


Paper # 437 Characterization of Tribological Behaviour of Hardmetals
K Bonny, P DE Baets, B Lauwers, J Vleugels, O Van Der Biest
Delft University of Technology - Tribology Department 2001


Paper # 438 Chemical and Mechanical Properties of ZDDP Antiwear Films on Steel and Thermal Spray Coatings Studied by XANES Spectroscopy and Nanoindentation Techniques
MA Nicholls, T Do, PR Norton, GM Bancroft, M Kasrai, T. Weston Capehart, Y-T Cheng, T Perry
Tribology Letters Volume 15, Number 3 / October, 2003 p. 241-248


Paper # 439 Chemical characterization and nanomechanical properties of antiwear films fabricated from ZDDP on a near hypereutectic Al–Si alloy
G Pereira, A Lachenwitzer, MA Nicholls, M Kasrai, PR Norton, G Stasio
Tribology Letters, Volume 18, Number 4, April 2005, pp. 411-427


Paper # 440 Chemistry of Antiwear Films from Ashless Thiophosphate Oil Additives
MN Najman, M Kasrai, GM Bancroft
Tribology Letters Volume 17 Number 2 - August 2004 - 217-229


Paper # 441 Chemistry of ZDDP Tribofilm by ToF-SIMS
C Minfray, JM Martin, MI De Barros, TL Mogne, R Kersting, B Hagenhoff
Tribology Letters Volume 17, Number 3 / October, 2004 p. 351-357


Paper # 442 Coated machine elements—fiction or reality?
B Podgornik
Surface and Coatings Technology Volumes 146-147, September-October 2001, p. 318-323


Paper # 443 Combination of ashless antiwear additives with metallic detergents: interactions with neutral and overbased calcium sulfonates
M Najman, M Kasrai, G Michael Bancroft, R Davidson
Tribology International Volume 39, Issue 4, April 2006, p. 342-355


Paper # 451 Effect of humidity on wear of M-50 steel with a branched perfluoropolyalkylether lubricant
LS Helmick, SK Sharma
Tribology Letters 6 (1999) 123–127


Paper # 452 Effect of liner surface properties on wear and friction in a non-firing engine simulator
DK Srivastava, AK Agarwal, J Kumar
Materials & Design Volume 28, Issue 5, 2007, p. 1632-1640


Paper # 455 Effects of Mo-Containing Dispersants on the Function of ZDDP: Chemistry and Tribology
Z Zhang, ES Yamaguchi, L Yu, M Kasrai, GM Bancroft
Tribology Transactions, 2007 - Taylor & Francis


Paper # 456 Effects of temperature and sliding distance on the wear behavior of austenitic Fe-Cr-C-Si hardfacing alloy
K Lee, KH Ko, JH Kim, GG Kim, S Kim
Tribology Letters Volume 26, Number 2 / May, 2007 p. 131-135


Paper # 458 Experimental simulation of chemical reactions between ZDDP tribofilms and steel surfaces during
C Minfray, TL Mogne, AA Lubrecht, JM Martin
Tribology Letters Volume 21, Number 1 / January, 2006 p. 65-76


Paper # 459 Extraction and tribological investigation of top piston ring zone oil from a gasoline engine
PM Lee, M Priest, MS Stark, JJ Wilkinson, JR Lindsay Smith, R Taylor, S Chung
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 220, Number 3, 2006, pp. 171-180


Paper # 460 Fracture and tribological behaviors of Al 2 O 3/5 vol.% SiC nanocomposites
SH Kim, YH Kim, SW Lee, T Sekino, K Niihara
Materials Science Forum, 2003


Paper # 463 Friction of polyoxymethylene homopolymer in highly loaded applications extrapolated from small-scale
P Samyn, P De Baets
Tribology Letters, Volume 19, Number 3, July 2005, pp. 177-189


Paper # 464 Friction, wear and material transfer of sintered polyimides sliding against various steel and diamond-like carbon coated surfaces
P Samyn, G Schoukens, J Quintelier, P De Baets
Tribology International Volume 39, Issue 6, June 2006, p. 575-589


Paper # 465 Friction-reducing mechanisms of molybdenum dithiocarbamate/zinc dithiophosphate combination: New insights in MoS2 genesis
C Grossiord, JM Martin, T Le Mogne, K Inoue
Journal of Vacuum Science & Technology May 1999 - Volume 17, Issue 3, 884-890


Paper # 466 Fuel lubricity
B Wilson
Industrial Lubrication and Tribology Volume 48 · Number 1 · January/February 1996


Paper # 470 Improved fuel efficiency by lubricant design: a review
RI Taylor, RC Coy
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 214, Number 1, 7 February 2000, pp. 1-15


Paper # 471 Improvement of PEEM images from thick inhomogeneous antiwear films using a thin Pt coating
MA Nicholls, GM Bancroft, M Kasrai, PR Norton, BH Stasio
Tribology Letters, Volume 18, Number 4, April 2005, pp. 453-462


Paper # 472 Influence of interfacial potential on the tribological behavior of brass/silicon dioxide rubbing
Q Chang, Y Meng, S Wen
Applied Surface Science, Volume 202, Number 1, 15 December 2002, pp. 120-125


Paper # 475 Influence of Internal Lubricants (PTFE and Silicon Oil) in Short Carbon Fibre-Reinforced Polyimide Composites on Performance Properties
P Samyn, P De Baets, G Schoukens
Tribology Letters Issue Volume 36, Number 2 / November 2009 p. 135-146


Paper # 476 Influence of temperature and ZDDP concentration on tribochemistry of surface-capped molybdenum sulfide nanoparticles studied by XANES spectroscopy
VN Bakunin, M Kasrai, GN Kuzmina, GM Bancroft, OP Parenago
Tribology Letters Volume 26, Number 1 / April, 2007 p. 33-43


Paper # 477 Interaction of ZDDP with Borated Dispersant Using XANES and XPS
Z Zhang, ES Yamaguchi, M Kasrai, GM Bancroft, G Barber
Tribology Transactions, Volume 47, Issue 4 January 2004 , p. 527 - 536


Paper # 478 Investigation of the scuffing characteristics of candidate materials for heavy duty diesel fuel
J Qu, JJ Truhan, PJ Blau
Tribology International Volume 38, Issue 4 , April 2005, p. 381-390


Paper # 479 Ionic liquids with ammonium cations as lubricants or additives
J Qu, JJ Truhan, S Dai, H Luo, PJ Blau
Tribology Letters, Vol. 22, No. 3, June 2006 p. 207 - 214


Paper # 480 Key life test to predict automotive ball joint wear using the Cameron-Plint high frequency friction
C HSU, G MCINTYRE
NGLI's. Annual Meeting No67, Asheville, North Carolina , USA, NLGI Spokesman 2001, vol. 64, no12, pp. 13-17


Paper # 481 Load-Dependent Transition in Sliding Wear Properties of TiCN–WC–Ni Cermets
BVM Kumar, I Kanpur, B Basu
Journal of the American Ceramic Society Volume 90 Issue 5 May 2007 Page 1534–1540


Paper # 482 Lubricant influence on flange wear in sharp railroad curves
P Waara
Industrial Lubrication and Tribology Volume 53 2001


Paper # 483 Lubrication of carbon coatings with MoS 2 single sheet formed by MoDTC and ZDDP lubricants
MI de Barros Bouchet, T Le Mogne, JM Martin
Tribology International 2005 - 38: 257–264


Paper # 485 Materials and surface treatments solutions for friction and wear problems in food industries
YM Chen, D Duchateau, JP Peyre, JJ Tessier
CETIM, Senlis, France


Paper # 487 Mechanical characteristics of colored film on stainless steel by the current pulse method
CJ Lin, JG Duh
Thin Solid Films, 1996 - 287:1-21-2, 80-86 - Elsevier


Paper # 494 Modeling of Abrasive Wear in a Piston Ring and Engine Cylinder Bore System
S TUNG, Y HUANG
Tribology Transactions 2004- 47: 17-22


Paper # 496 Morphology and Nanomechanical Properties of ZDDP Antiwear Films as a Function of Tribological Contact Time
M Aktary, MT McDermott, GA McAlpine
Tribology Letters, Volume 12, Number 3, April 2002, pp. 155-162


Paper # 497 MoS2 single sheet lubrication by molybdenum dithiocarbamate
C Grossiord, K Varlot, JM Martin, T Le Mogne, C Esnoufb, K Inouec
Tribology International Volume 31, Issue 12, December 1998, p. 737-743


Paper # 498 Nanomechanical properties of films derived from zincdialkyldithiophosphate
OL Warren, JF Graham, PR Norton, JE Houston, TA Michalske
Tribology Letters Volume 4, Number 2 / March, 1998 p. 189-198


Paper # 499 Nanometer Scale Chemomechanical Characterization of Antiwear Films
MA Nicholls, PR Norton, GM Bancroft, M Kasrai, T Do, BH Frazer, G De Stasio
Tribology Letters Volume 17, Number 2 / August, 2004 p. 205-216


Paper # 500 New opportunities in automotive tribology
MP Everson, H Ohtani
Tribology Letters Volume 5, Number 1 / July, 1998


Paper # 502 Overview of Techniques for Measuring Friction Using Bench Tests and Fired Engines
DN Assanis, DJ Patterson, SC Tung, SI Tseregounis
SAE Technical Papers Document Number: 2000-01-1780


Paper # 503 Percolative mechanism of sliding wear in alumina/zirconia composites
JF Bartolomé, C Pecharromán, JS Moya, A Martín
Journal of the European Ceramic Society 26 (2006) 2619–2625


Paper # 504 Piston Ring-Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part II—Correlation With Bench Test Data
O Akalin, GM Newaz
Journal of Tribology - January 2001 - Volume 123, Issue 1, 219-223


Paper # 507 Scuffing resistance after tribosynthesis of a modified surface layer
J Hershberger, OO Ajayi, YA Bello, GR Fenske
Thin Solid Films Volumes 469-470, 22 December 2004, p. 263-267


Paper # 509 Impacts of Bore Surface Finish and Coating Treatment on Tribological Characteristics of Engine Cylinder Bores
Simon C Tung, John Emley
SAE Paper - 2002-01-1638 - 05/06/2002


Paper # 510 Simulated fuel dilution and friction-modifier effects on piston ring friction
O Smith, M Priest, RI Taylor, R Price, A Cantlay, R Coy
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 220, Number 3, 2006, pp. 181-189


Paper # 512 Sliding friction and wear of magnesium alloy AZ91D produced by two different methods
PJ Blau, M Walukas
Tribology International Volume 33, Issue 8, August 2000, p. 573-579


Paper # 516 Solution decomposition of zinc dialkyl dithiophosphate and its effect on antiwear and thermal film formation studied by X-ray absorption spectroscopy
MLS Fuller, M Kasrai, GM Bancroft, K Fyfe, KH Tan
Tribology International Volume 31, Issue 10 , October 1998, p. 627-644


Paper # 518 Spatial Distribution of the Chemical Species Generated Under Rubbing from ZDDP and Dispersed Potassium Triborate
K Masenelli-Varlot, M Kasrai, GM Bancroft, G De Stasio, B Gilbert, ES Yamaguchi, PR Ryason
Tribology Letters Volume 14, Number 3 / April, 2003 p. 157-166


Paper # 519 Spectromicroscopy of tribological films from engine oil additives. Part I. Films from ZDDPs
GW Canning, ML Suominen Fuller, GM Bancroft, MI Kasrai; JN Cutler, G De Stasio, B Gilbert
Tribology Letters, Volume 6, Numbers 3-4, 1999 - 159-169


Paper # 520 Structure and properties of the TiN and Ti (C, N) coatings deposited in the PVD process on high-speed steels
LA Dobrzanski, M Adamiak
Journal of Materials Processing Technology Volume 133, Issues 1-2, 1 February 2003, p. 50-62


Paper # 521 Study of interaction of EP and AW additives with dispersants using XANES
Z Zhang, M Najman, M Kasrai, GM Bancroft, ES Yamaguchi
Tribology Letters Volume 18, Number 1 / January, 2005 p. 43-51


Paper # 522 Study of surface films of crystalline and amorphous overbased sulfonates and sulfurized olefins by X-ray absorption near edge structure (XANES) spectroscopy
MT Costello, RA Urrego, M Kasrai
Tribology Letters Volume 26, Number 2 / May, 2007 p. 173-180


Paper # 523 Study of surface films of overbased sulfonates and sulfurized olefins by X-Ray Absorption Near Edge Structure (XANES) spectroscopy
MT Costello, M Kasrai
Tribology Letters Volume 24, Number 2 / November, 2006 p. 163-169


Paper # 524 Study of the Chemistry of Films Generated from Phosphate Ester Additives on 52100 Steel Using X-ray Absorption Spectroscopy
MN Najman, M Kasrai, GM Bancroft, A Miller
Tribology Letters Volume 13, Number 3 / October, 2002 p. 209-218


Paper # 525 Study of the Interaction of ZDDP and Dispersants Using X-ray Absorption Near Edge Structure Spectroscopy—Part 2: Tribochemical Reactions
ES Yamaguchi, Z Zhang, M Kasrai, GM Bancroft
Tribology Letters Volume 15, Number 4 / November, 2003 p. 385-394


Paper # 526 Surface activity of high-temperature perfluoropolyalkylether oil additives
PJ John, J Liang, JN Cutler
Tribology Letters 4 (1998) 277–285


Paper # 527 Surface chemistry of new lubrication systems for high-speed spacecraft bearings
JN Cutler, JH Sanders, JS Zabinski, PJ John, JR McCutchen, LS Kasten, KH Tan
Tribology Letters Volume 8, Number 1, 2000, pp. 17-23


Paper # 529 Surface-capped molybdenum sulfide nanoparticles–a novel type of lubricant additives
AY Suslov, VN Bakunin, GN Kuz’mina, LM Vedeneeva, O Parenago, C Migdal, P Stott
Lubrication Science Volume 16, Issue 3 , p. 207 - 214


Paper # 530 Surface-Capped Molybdenum Sulfide Nanoparticles–a Novel Type of Lubricant Additives
VN Bakunin, AY Suslov, GN Kuz’mina, LM Vedeneeva,
World Tribology Congress 2001


Paper # 531 Temperature Effects on Mechanical Properties of Zinc Dithiophosphate Tribofilms
K Demmou, S Bec, JL Loubet, JM Martin
Tribology International 2006, Volume 39, No 12 p. 1558-1563


Paper # 532 The chemistry of antiwear films generated by the combination of ZDDP and MoDTC examined by x-ray absorption spectroscopy
M Kasrai, JN Cutler, K Gore, G Canning, GM Bancroft, KH Tan
Tribology Transactions Volume 41, no. 1, pp. 69-77. Jan. 1998


Paper # 533 Impact of Cr3C2/VC addition on the dry sliding friction and wear response of WC–Co cemented carbides
K Bonny, P De Baets, J Vleugels, S Huang
Wear Volume 267, Issues 9-10, 9 September 2009, p. 1642-1652


Paper # 534 The Correlation of Microchemical Properties to Antiwear (AW) Performance in Ashless Thiophosphate Oil Additives
MN Najman, M Kasrai, GM Bancroft, BH Frazer, G De Stasio
Tribology Letters Volume 17, Number 4 / November, 2004 p. 811-822


Paper # 535 The decomposition reaction path of a linear PFPAE under tribological conditions
LS Helmick, JC Liang, BE Ream
Tribology Letters 4 (1998) 287–292


Paper # 537 The effect of residual stresses in functionally graded alumina–ZTA composites on their wear and friction behaviour
S Novak, M Kalin, P Lukas, G Anne, J Vleugels, O Van Der Biest
Journal of the European Ceramic Society Volume 27, Issue 1, 2007, p. 151-156


Paper # 542 The role of the cation in antiwear films formed from ZDDP on 52100 steel
G Pereira, A Lachenwitzer, D Munoz-Paniagua, M Kasrai, P Norton, M Abrecht, P Gilbert
Tribology Letters Volume 23, Number 2 / August 2006 p. 109-119


Paper # 543 The tribological properties of several silahydrocarbons for use in space mechanisms
WR Jones Jr, MJ Jansen, LJ Gschwender, CE Snyder, SK Sharma, RE Predmore, MJ Dube
Proceedings of the 9th European Space Mechanisms and Tribology Symposium, 19-21 September 2001, Liège, Belgium. ESA Publications Division, ISBN 92-9092-761-5, 2001, p. 57 - 63


Paper # 544 The use of post-mortem Raman spectroscopy in explaining friction and wear behaviour of sintered polyimide at high temperature
P Samyn, J Vancraenenbroeck, F Verpoort, P De Baets
Tribotest Volume 12, Issue 3 , p. 223 - 236


Paper # 545 The use of X-ray absorption spectroscopy for monitoring the thickness of antiwear films from ZDDP
ML Suominen Fuller, L Rodriguez Fernandez, GR Massoumi, WN Lennard, M Kasrai, GM Bancroft
Tribology Letters Volume 8, Number 4 / May, 2000 p. 187-192


Paper # 548 Thermal transitions in polyimide transfer under sliding against steel, investigated by raman spectroscopy and thermal analysis
P Samyn, P De Baets, J Van Craenenbroeck, F Verpoort, G Schoukens
Journal of Applied Polymer Science 2006, Volume 101, No 3, p. 1407-1425


Paper # 551 Topography and nanomechanical properties of tribochemical films derived from zinc dialkyl and diaryl
JF Graham, C McCague, PR Norton
Tribology Letters 6 (1999) 149–157


Paper # 552 Tribochemical interactions between molybdenum dithiophosphate and succinimide additives
C Guerret-Piecourt, C Grossiord, T Le Mogne, JM Martin, T Palermo
Surface and Interface Analysis Volume 30, Issue 1 , p. 646 - 650


Paper # 553 Tribochemical Wear of Rail Steels Lubricated with Synthetic Ester-Based Model Lubricants
P Waara, T Norrby, B Prakash
Tribology Letters Issue Volume 17, Number 3 / October, 2004 p. 561 - 568


Paper # 554 Tribochemistry of Overbased Calcium Detergents Studied by ToF-SIMS and Other Surface Analyses
L Cizaire, JM Martin, E Gresser, NT Dinh, C Heau
Tribology Letters Volume 17, Number 4 / November, 2004 p. 715-721


Paper # 555 Tribochemistry of PFPAE fluid on M-50 surfaces by FTIR spectroscopy
J LIANG, LS HELMICK
Tribology Transactions 1996, 39:33, 705-709


Paper # 556 Tribofilms generated from ZDDP and DDP on steel surfaces: Part 1, growth, wear and morphology
Z Zhang, ES Yamaguchi, M Kasrai, GM Bancroft
Tribology Letters Volume 19, Number 3 / July, 2005 p. 211-220


Paper # 557 Tribological behavior and tribofilm composition in lubricated systems containing surface-capped molybdenum sulfide nanoparticles
VN Bakunin, GN Kuzmina, M Kasrai, OP Parenago, C Migdal, P Stott
Tribology Letters - Volume 22, Number 3 / June, 2006


Paper # 561 Tribological behaviour of diamond-like carbon coatings applied on polymer extrusion dies
P De Baets, P Deckers, F Van Parys, K Vercammen
World Tribology Congress 2001


Paper # 566 Tribological Properties of Hot Pressed Alumina-Silicon Carbide Nanocomposite
SH Kim, YH Kim, T Sekino, K Niihara, SW Lee
AzoJoMo DOI: 10.2240/azojomo0144 Posted: September 2005


Paper # 568 Tribological studies of ZrO-implanted on stainless steel substrate
H Dogan, F Findik, A Oztarhan
Industrial Lubrication and Tribology Dec 2004 Volume: 56 Issue: 6 Page: 341 - 345


Paper # 569 UHV friction of tribofilms derived from metal dithiophosphates - all 3 versions »
C Grossiord, JM Martin, T Le Mogne, T Palermo
Tribology Letters 6 (1999) 171–179


Paper # 574 Wear mechanisms associated with the lubrication of zirconia ceramics in various aqueous solutions
M Kalin, G Dražic, S Novak, J Vižintin
Journal of the European Ceramic Society, Volume 26, Issue 3, 2006, p. 223-232


Paper # 577 Wear testing and specification of hydraulic fluid in industrial applications
H Olsson, J Ukonsaari
Tribology International Volume 36, Issue 11, November 2003, p. 835-841


Paper # 578 Wear Testing of Seals in Magneto-Rheological Fluids
V Iyengar, A Alexandridis, S Tung, D Rule
Tribology Transactions, 2004 47:1 - 23-28 - Taylor & Francis


Paper # 579 Wear transitions and stability of polyoxymethylene homopolymer in highly loaded applications compared to small-scale testing
P Samyn, P De Baets, G Schoukens, J Quintelier
Tribology International Volume 40, Issue 5, May 2007, p. 819-833


Paper # 580 X-ray absorption spectroscopy of antiwear films on aluminum alloys generated from zinc
M Fuller, M Kasrai, JS Sheasby, GM Bancroft
Tribology Letters 1 (1995) 367-378


Paper # 581 The development of a "pin on twin" scuffing test to evaluate materials for heavy-duty diesel fuel injectors
JJ Truhan, J Qu, PJ Blau
Tribology Transactions Volume 50 Number 1 January - March 2007


Paper # 582 Friction characteristics between metal contacting surfaces from anti-wear additives with application to metal V-belt type continuosly variable transmission lubricants
K Narita, M Priest
Journal of Engineering Tribology May 2007 Volume 221 No J3 p. 195-207


Paper # 583 Investigation of fundamental wear mechanisms at piston ring and cylinder wall interface in internal combustion engines
P Papadopolous, M Priest, W M Rainforth
Journal of Engineering Tribology May 2007 Volume 221 No J3 p. 333-343


Paper # 621 X-Ray Absorption Spectroscopy and Morphology Study on Antiwear Films Derived from ZDDP Under Different Sliding Frequencies
YR Li, G Pereira, A Lachenwitzer, M Kasrai, PR Norton
Tribology Letters Volume 27, Number 3 / September, 2007


Paper # 622 Effect of the microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions
L Prchlik, S Sampath,
Wear Volume 262, Issues 1-2, 4 January 2007, p. 11-23


Paper # 623 A variable temperature mechanical analysis of ZDDP-derived antiwear films formed on 52100 steel
G Pereira, D Munoz-Paniagua, A Lachenwitzer, M Kasrai, P R Norton, T W Capehart, TA Perry, YT Cheng,
Wear Volume 262, Issues 3-4, 4 February 2007, p. 461-470


Paper # 624 Experimental analysis of tribological properties of lubricating oils with nanoparticle additives
YY WU, WC TSUI, TC LIU,
Wear Volume 262, Issues 7-8, 15 March 2007, p. 819-825


Paper # 625 Fuel Efficient Lubricant Formulations for Passenger Cars Or Heavy Duty Trucks
Henri Bourgognon, Bernard Lamy, Francois Benard, Frederic Espinoux
SAE Paper - 2000-01-2055 - 06/19/2000


Paper # 626 Highly effective friction modifiers from nano-sized materials
DA Bokarev, VN Bakunin, GN Kuz’mina, OP Parenago,
Chemistry and Technology of Fuels and Oils Volume 43, Number 4 / July, 2007


Paper # 627 Correlation between the tribological behaviour and wear particle morphology—case of grey cast iron 250 versus Graphite and PTFE
C KOWANDY, C RICHARD, YM CHEN, JJ TESSIER,
Wear Volume 262, Issues 7-8, 15 March 2007, p. 996-1006


Paper # 628 Friction and Wear Mechanisms of Sintered and Thermoplastic Polyimides under Adhesive Sliding
P Samyn, G Schoukens, F Verpoort, J Van Craenenbroeck, P De Baets,
Macromolecular Materials and Engineering Volume 292, Issue 5 , p. 523 - 556


Paper # 629 Load-Dependent Transition in Sliding Wear Properties of TiCNWCNi Cermets
BV Manoj Kumar, B Basu, M Kalin, J Vizintin,
Journal of the American Ceramic Society Volume 90, Number 5, May 2007 , pp. 1534-1540


Paper # 636 The effect of lubricating oil condition on the friction and wear of piston ring and cylinder liner materials in a reciprocating bench test
John J Truhan, Jun Qu, Peter J Blau
Wear 259 (2005) 1048–1055


Paper # 661 Tribological properties of ionic liquids as lubricants and additives. Part 1: synergistic tribofilm formation between ionic liquids and tricresyl phosphate
Fox MT, Priest M
Journal Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Issue Volume 222, Number 3 / 2008 p. 291-303


Paper # 662 Tribological characteristics of ashless dithiocarbamate derivatives and their combinations with ZDDP as additives in mineral oil
Kaizhong Fan, Jing Li, Haibing Ma, Hua Wu, Tianhui Ren, M Kasrai and GM Bancroft
Tribology International, Volume 41, Issue 12, December 2008, p. 1226-1231


Paper # 663 Application of diamond-like carbon coatings to elastomers frictional surfaces
L Martínez, R Nevshupa, L Álvarez, Y Huttel, J Méndez, E Román, E Mozas, JR Valdés, MA Jimenez, Y Gachon, C Heau and F Faverjon
Tribology International Volume 42, Issue 4, April 2009, Pages 584-590


Paper # 664 Parametric Optimization of Periodic Textured Surfaces for Friction Reduction in Combustion Engines
Costin Caciu; Etienne Decencire; Dominique Jeulin
Tribology Transactions, Volume 51, Issue 4 July 2008 , p. 533 – 541


Paper # 665 Influence of electrical discharge machining on tribological behavior of ZrO2–TiN composites
K Bonny, P De Baets, J Vleugels, A Salehi, O Van der Biest, B Lauwers and W Liu
Wear Volume 265, Issues 11-12, 26 November 2008, p. 1884-1892


Paper # 666 Friction and wear performance of diamond-like carbon and Cr-doped diamond-like carbon coatings in contact with steel surfaces
H Renondeau, R I Taylor, G C Smith, A A Torrance
Journal Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Issue Volume 222, Number 3 / 2008 p. 231-240


Paper # 667 Dry Reciprocating Sliding Friction and Wear Response of WC–Ni Cemented Carbides
K Bonny , P De Baets, J Vleugels, S Huang and B Lauwers
Tribology Letters Issue Volume 31, Number 3 / September, 2008


Paper # 668 The lubricity of graphite flake inclusions in sintered polyimides affected by chemical reactions at high temperatures
Pieter Samyn and Gustaaf Schoukens
Carbon, Volume 46, Issue 7, June 2008, p. 1072-1084


Paper # 669 The Effect of Steel Hardness on the Performance of ZDDP Antiwear Films: A Multi-Technique Approach
Yue-Rong Li, Gavin Pereira, Masoud Kasrai and Peter R Norton
Tribology Letters Issue Volume 29, Number 3 / March, 2008


Paper # 670 The sliding behaviour of sintered and thermoplastic polyimides investigated by thermal and Raman spectroscopic measurements
Pieter Samyn, Jan Quintelier, Gustaaf Schoukens and Patrick De Baets
Wear Volume 264, Issues 9-10, 10 April 2008, p. 869-876


Paper # 671 Sliding Wear of Electrically Conductive ZrO2-WC Composites Against WC–Co Cemented Carbide
K Bonny , P De Baets, J Vleugels, A Salehi, O Van der Biest, B Lauwers and W Liu
Tribology Letters Issue Volume 30, Number 3 / June, 2008 p. 191-198


Paper # 672 Calculation and significance of the maximum polymer surface temperature T* in reciprocating cylinder-on-plate sliding
Pieter Samyn, Gustaaf Schoukens
Polymer Engineering and Science 2008 Volume 48 Issue 4, p. 774 - 785


Paper # 673 Boundary lubrication film formation from phosphorus antiwear additives with application to metal V-belt type continuously variable transmission lubricants
K Narita, M Priest
Journal Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Issue Volume 222, Number 3 / 2008 p. 343-356


Paper # 674 Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rolling
K Louaisil, M Dubar, R Deltombe, A Dubois and L Dubar
Wear Volume 266, Issues 1-2, 5 January 2009, p. 119-128


Paper # 675 Reciprocative sliding wear of ZrO2–TiCN composites against WC-Co cemented carbide
K Bonny, P De Baets, J Vleugels, A Salehi, B Lauwers and W Liu
Wear Volume 265, Issues 11-12, 26 November 2008, p. 1767-1775


Paper # 676 Influence of secondary electro-conductive phases on the electrical discharge machinability and frictional behavior of ZrO2-based ceramic composites
K Bonny, P De Baets, J Vleugels, A Salehi, O Van der Biest, B Lauwers and W Liu
Journal of Materials Processing Technology, Volume 208, Issues 1-3, 21 November 2008, p. 423-430


Paper # 677 Reciprocating sliding friction and wear behavior of electrical discharge machined zirconia-based composites against WC–Co cemented carbide
K Bonny, P De Baets, J Vleugels, O Van der Biest, A Salehi, W Liu and B Lauwers
International Journal of Refractory Metals and Hard Materials Volume 27, Issue 2, March 2009, Pages 449-457


Paper # 678 Influence of electrical discharge machining on the reciprocating sliding friction and wear response of WC–Co cemented carbides
K Bonny, P De Baets, W Ost, S Huang, J Vleugels, W Liu and B Lauwers
International Journal of Refractory Metals and Hard Materials Volume 27, Issue 2, March 2009, Pages 350-359


Paper # 679 Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides
K Bonny, P De Baets, W Ost, J Vleugels, S Huang, B Lauwers and W Liu
Wear Volume 266, Issues 1-2, 5 January 2009, p. 84-95


Paper # 680 Tribochemistry in sliding wear of TiCN–Ni-based cermets
BV Manoj Kumar, Bikramjit Basu, Joze Vizintin, Mitjan Kalin
Journal of Materials Research May 2008


Paper # 681 Tribological performance of an Al-Si alloy lubricated in the boundary regime with zinc dialkyldithiophosphate and molybdenum dithiocarbamate additives
Xia, X; Morina, A; Neville, A; Priest, M; Roshan, R; Warrens, C P; Payne, M J
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 222, Number 3, 2008 , pp. 305-314


Paper # 687 Friction and Wear Properties Study of Nanoparticles as Additive in Lubrication Oil
Ta-Chuan Liu, James H Wang, Jerry T W Shei, Yuh-Yih Wu
SAE Paper - 2006-32-0016 - 11/13/2006


Paper # 690 Tribological evaluation of aluminum and magnesium sheet forming at high temperature
M D Hanna
Wear 267 (2009) 1046–1050


Paper # 694 Exploring PVD Coatings for Cylinder Liner Applications
Padma Kodali, Nicole Stahley
SAE Paper - 2001-01-0573 - 03/05/2001


Paper # 701 Tribological characteristics of aluminum alloys sliding against steel lubricated by ammonium and imidazolium ionic liquids
Jun Qu, Peter J Blau, Sheng Dai, Huimin Luo, Harry M Meyer III, John J Truhan
Wear Volume 267, Issues 5-8, 15 June 2009, p. 1226-1231


Paper # 702 Engine Oil Effects on Friction and Wear Using 2.2l Direct Injection Diesel Engine Components for Bench Testing: Part 2--Tribology Bench Test Results and Surface Analyses
Simon C Tung, Michael L McMillan, Hong Gao, Ewa A Bardasz
SAE Paper - 2004-01-2005 - 06/08/2004


Paper # 703 Evaluating the role of spherical titanium oxide nanoparticles in reducing friction between two pieces of cast iron
MJ Kao, CR Lin
Journal of Alloys and Compounds Volume 483, Issues 1-2, 26 August 2009, p. 456-459


Paper # 704 Wear Processes in Low Speed Diesel Engines
Cees Schenk, Jan Hengeveld, Kjeld Aabo
Shell Global Solutions - OKTOBER 2003 ~ SCHIP en WERF de ZEE


Paper # 705 Test Method to Evaluate Cylinder Liner-Piston Ring Coatings for Advanced Heat Engines
K C Radil
NASA Technical Memorandum 107526 - ARL-MR-362 - May 1996


Paper # 706 Basic Mechanisms of Diesel Lubrication Correlation of Bench and Engine Tests
A Cameron, JA Greenwood, AF Alliston-Greiner
US Army R&D Contract No. DAJ 45 86 C0007 - March 1991


Paper # 709 Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien (In German: Observations of the tribological behaviour of unfilled and filled TPU materials)
István Gódor, Jürgen Schiffer, Florian Grün, Zoltán Major, Thomas Schwarz
GfT Tribologie-Fachtagung - Gottingen 21-23 September 2009


Paper # 719 Additive Interactions and Depletion Processes in Fuel Efficient Engine Oils
Milton D Johnson, Dr Stefan Korcek
SAE Paper - 971694 - 05/1997


Paper # 720 An Investigation of Tribological Characteristics of Energy-Conserving Engine Oils Using a Reciprocating Bench Test
Simon C Tung, Spyros I Tseregounis
SAE Paper - 2000-01-1781 - 06/19/2000


Paper # 721 Assessment of Correlation Between Bench Wear Test Results and Engine Cylinder Wear, Short-Trip Service
Simon C Tung, Shirley E Schwartz, Kevin B Brogan, Chris J Mettrick
SAE Paper - 2000-01-2947 - 10/16/2000


Paper # 724 Effects of Aging on Frictional Properties of Fuel Efficient Engine Oils
Milton D Johnson, Ronald K Jensen, Erin M Clausing, Kurt Schriewer, Stefan Korcek
SAE Paper - 952532 - 10/01/1995


Paper # 725 The potential of plasma electrolytic oxidized eutectic aluminium-silicon alloy as a cylinder wall surface for lightweight engine blocks
K Mistry, M Priest, S Shrestha
Proceedings of the I MECH E Part J Journal of Engineering Tribology, Volume 224, Number J2, 2010, pp. 221-229


Paper # 727 Application of ?nite element simulations for data reduction of experimental friction tests on rubber–metal contacts
J M Bielsa, M Canales, F J Martinez, M A Jimenez
Tribology International 43 (2010) 785 –795


Paper # 730 Chemical and mechanical analysis of tribofilms formed from fully formulated oils Part 2 Films on AlSi alloy (A383)
G Pereira, A Lachenwitzer, YR Li, M Kasrai, GM Bancroft, PR Norton, M Abrecht, P Gilbert, T Regier, YF Hu, L Zuin
Tribology - Materials, Surfaces & Interfaces, Volume 1, Number 2, June 2007, 105-112(8)


Paper # 731 Improved mixed and boundary lubrication with glycerol-diamond technology
M De Barros Bouchet, C Matta, T Le-Mogne, J Michel Martin, T Sagawa, S Okuda, S, M Kano
Tribology - Materials, Surfaces & Interfaces, Volume 1, Number 1, March 2007, 28-32(5)


Paper # 732 Chemical and mechanical analysis of tribofilms from fully formulated oils Part 1 Films on 52100 steel
G Pereira, A Lachenwitzer, YR Li, M Kasrai, GM Bancroft, PR Norton, M Abrecht, P Gilbert, T Regier, YF Hu, L Zuin
Tribology - Materials, Surfaces & Interfaces, Volume 1, Number 1, March 2007, 48-61(14)


Paper # 734 Nanoscale chemistry and mechanical properties of tribofilms on AlSi alloy (A383): interaction of ZDDP, calcium detergent and molybdenum friction modifier
G Pereira, A Lachenwitzer, D Munoz-Paniagua, M Kasrai, PR Norton, TW Capehart, TA Perry, YT Cheng
Tribology - Materials, Surfaces & Interfaces, Volume 1, Number 1, March 2007, 4-17(14)


Paper # 736 Consideration of Test Parameters in Reciprocating Tribometers Used to Replicate Ring-On-Liner Contact
PM Lee, RJ Chittenden
Tribology Letters (On-line) 31 March 2010


Paper # 737 Piston ring tribology - A literature survey
P Andersson, J Tamminen, C-E Sandström
VTT Research Notes 2178 December 2002


Paper # 739 Using the Energy Pulse Concept for Designing Better Wear Tests
Alliston-Greiner A F
IRG WOEM OECD Paper 21-1


Paper # 741 Pin-on-Twin Reciprocating Scuffing Initiation Test
P J Blau
ORNL Tribology Research


Paper # 752 Effects of Chlorinated Paraffin and ZDDP Concentrations on Boundary Lubrication Properties of Mineral and Soybean Oils
SJ Asadauskas, G Biresaw
Tribology Letters 2010 Volume 37, Number 2, 111-121


Paper # 753 Effects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 Nanocomposites
SH Kim, SH Cho, SP Hannula
Materials Science Forum 2010 Volume 658 p. 404-407


Paper # 756 Elucidating the microstructure and wear behavior of tungsten carbide multi-pass cladding on AISI 1050 steel
YC Lin
Journal of Materials Processing Technology 2010 Volume 210, Issue 2, p. 219-225


Paper # 758 Evaluation of morphology and deposits on worn polyimide/graphite composite surfaces by contact-mode AFM
P Samyn, G Schoukens
Wear 2010 Volume 270, Issues 1-2, p. 57-72


Paper # 763 Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact
K Bonny, P De Baets, Y Perez, J Vleugels, B Lauwers
Wear 2010 Volume 268, Issues 11-12, p. 1504-1517


Paper # 765 Influence of electrical discharge machining on sliding friction and wear of WC-Ni cemented carbide
K Bonny, P De Baets, J Van Wittenberghe
Tribology International 2010 Volume 43, Issue 12, p. 2333-2344


Paper # 766 Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of WC Based Cemented Carbides
K Bonny, P Baets, W Ost, S Huang, J Vleugels
Advanced Tribology 2010 2010, Part 3, II, p. 435-436


Paper # 768 Mapping microstructure inhomogeneity using electron backscatter diffraction in 316L stainless steel subjected to hot plane strain compression tests
L Sun, MJ Thomas, BP Wynne
Materials Science and Technology 2010 Volume 26, Number 12, p. 1477-1486


Paper # 771 Micro to nanoscale surface morphology and friction response of tribological polyimide surfaces
P Samyn, G Schoukens
Applied Surface Science 2010 Volume 256, Issue 11, p. 3394-3408


Paper # 774 Miscellaneous additives and vegetable oils
J Crawford, A Psaila
Chemistry and Technology of Lubricants 2010, Part 2, p. 189-211


Paper # 782 Resolving the Chemical Variation of Phosphates in Thin ZDDP Tribofilms by X-ray Photoelectron Spectroscopy Using Synchrotron Radiation: Evidence for …
JG Zhou, J Thompson, J Cutler, R Blyth, M Kasrai
Tribology Letters 2010 Volume 39, Number 1, p. 101-107


Paper # 783 Role of internal additives in the friction and wear of carbon-fiber-reinforced polyimide
P Samyn, P De Baets
Journal of Applied Polymer Science 2010 Volume 116, Issue 2, p. 1146–1156


Paper # 786 Study of silane-based antiwear additives: Wear and chemistry
LG Yu, ES Yamaguchi, M Kasrai
Tribology International Volume 44, Issue 6, June 2011, Pages 692-701


Paper # 787 Surface finishing: Impact on tribological characteristics of WC-Co hardmetals
K Bonny, P De Baets, J Quintelier, J Vleugels
Tribology International 2010 Volume 43, Issues 1-2, p. 40-54


Paper # 795 Tribological behavior of wire-EDM'ed ZrO2-composites and cemented carbides
P Delgado, K Bonny, O Malek
Sustainable Construction and Design, Day of Research 2010, Volume 1, p. 68-72


Paper # 796 Tribological behaviour of alternate hypereutectic AlSi alloys with different antiwear additives
ANK Jadoon
Tribology - Materials, Surfaces & Interfaces 2010, Volume 4, Number 2, p. 61-73


Paper # 797 Tribological behaviour of die tool materials used for die compaction in powder metallurgy
W Li, PJ Blau, J Qu, SJ Park
Powder Metallurgy 2010, Volume 53, Number 3, p. 251-259


Paper # 805 Unravelling the chemical mysteries of ZDDP tribofilms using variable photon-energy X-ray photon spectroscopy
JG Zhou, J Thompson, J Cutler, R Blyth
Canada Light Source Inc 2010 Research Report


Paper # 815 Correlated wear measurements using gold implantation, backscattering, nuclear activation analysis and profilometry
D Shakhvorostov, A Lachenwitzer, L Coatsworth
Tribology International Volume 44, Issue 6, June 2011, Pages 737-750


Paper # 828 Tribometer Investigation of the Frictional Response of Piston Rings when Lubricated with the Separated Phases of Lubricant Contaminated with the Gasoline Engine Biofuel Ethanol and Water
PR De Silva, M Priest, PM Lee, RC Coy
Tribology Letters Volume 43, Number 2, 107-120


Paper # 829 A Study on Mechanical and Tribological Properties of Hot Pressed Al2O3/ZrO2/h-BN/TiO2 Composites
HH Lee, SH Kim, B Joshi
Materials Science Forum (Volume 695) Eco-Materials Processing and Design XII Pages 417-420


Paper # 830 Calcium sulphonate and its interactions with ZDDP on both aluminium-silicon and model silicon surfaces
M Burkinshaw, A Neville, A Morina
Tribology International Volume 46, Issue 1, February 2012, Pages 41-51


Paper # 831 Challenges of simulating fired engine ring-liner oil additive/surface interactions in ring-liner bench tribometer
A Morina, PM Lee, M Priest
Tribology - Materials, Surfaces & Interfaces, Volume 5, Number 1, March 2011 , pp. 25-33


Paper # 832 Characterization of various coatings in terms of friction and wear for internal combustion engine piston rings
A Guermat, G Monteil
Mechanika Volume 17, No 6 (2011)


Paper # 833 Dry sliding friction and wear response of WC-Co hardmetal pairs in linearly reciprocating and rotating contact
Y Perez Delgado, K Bonny, P De Baets
University of Ghent, Sustainable Construction and Design 2011, Pages 12 to 18


Paper # 835 Effect of base oil lubrication in comparison with non-lubricated sliding in diamond-like carbon contacts
I Velkavrh
Tribology - Materials, Surfaces & Interfaces, Volume 5, Number 2, June 2011 , pp. 53-58


Paper # 837 Effects of Fabricated Method on the Coefficient of Friction of Al2O3-15 wt% ZrO2-3 wt% Solid Lubricant Composites
SH Kim, ME Cura, O Söderberg
Materials Science Forum (Volume 695) Eco-Materials Processing and Design XII Pages 231-234


Paper # 840 Experimental Analysis of Nanomechanics of Spherical Titanium Oxide Nanooils in Reducing Friction
MJ Kao
Journal of Nanoscience and Nanotechnology, Volume 11, Number 8, August 2011 , pp. 7281-7284


Paper # 841 Fabrication of TiO2 Nano-Oils by a Plasma Arc Nanoparticles Synthesis System
MJ Kao, CC Yu
Materials and Manufacturing Processes Volume 26, Issue 11, 2011


Paper # 842 Impact of wire-EDM on dry sliding friction and wear of WC-based and ZrO2-based composites
Y Perez Delgado, K Bonny, P De Baets, PD Neis
Wear Volume 271, Issues 9-10, 29 July 2011, Pages 1951-1961


Paper # 845 Investigation of the interactions between a novel, organic anti-wear additive, ZDDP and overbased calcium sulphonate
A Greenall, A Neville, A Morina
Tribology International Volume 46, Issue 1, February 2012, Pages 52-61


Paper # 849 Role of friction modifiers on the tribological performance of hypereutectic Al–Si alloy lubricated in boundary conditions
A Morina, X Xia, A Neville, M Priest
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology June 2011 vol. 225 no. 6 Pages 369-378


Paper # 850 Study of Lubricity Characteristics of Non-Edible Vegetable based Bio-lubricant and Low SAP Engine Lubricants
D Singh, AK Singh, N Singh
Indian Institute of Petroleum 12-Sep-2011


Paper # 851 Surface engineering to improve the durability and lubricity of Ti-6Al-4V alloy
DG Bansal, OL Eryilmaz
Wear Volume 271, Issues 9-10, 29 July 2011, Pages 2006-2015


Paper # 853 Tribometer investigation of the frictional response of piston rings with lubricant contaminated with the gasoline engine biofuel ethanol and water
PR De Silva, M Priest, PM Lee
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology June 2011 vol. 225 no. 6 Pages 347-358


Paper # 854 Using TiODN2/DN nanofluid additive for engine lubrication oil
YY Wu
Industrial Lubrication and Tribology, Volume 63, Number 6, 2011 , pp. 440-445



Return to Machine Publication Index listing

Copyright © 2012 Phoenix Tribology Ltd.