| Paper #107 | Characterization of Molybdenum Nitride Coatings Produced by Arc-PVD Technique |
| Urgen M, Eryylmaz O L, Cakyr A F, Kayaly E S, Nilufer B, Ipyk Y, |
Presented at ICMCTF97, published in Surface & Coatings Technology, 94/95, 1997.
|
| Paper #151 | The Effect of Load and Relative Humidity on Friction Coefficient Between High Density Polyethylene on Galvanized Steel - Preliminary Results |
| Da Silva C H, Tanaka D K, Sinatora A, |
Wear 225-229 (1999), 339-342.
|
| Paper #373 | The Effects of Abrasive Particle Size on the Sliding Friction Coefficient of Steel using a Spiral Pin-on-disk Apparatus |
| Pintaude G, Tanaka D K, Sinatora A, |
Wear 255 (2003) 55 – 59
|
| Paper #444 | Comparison of flame sprayed Al2O3/TiO2 coatings: Their microstructure, mechanical properties and tribology behavior |
| KA Habib, JJ Saura, C Ferrer, MS Damra, E Giménez |
Surface and Coatings Technology Volume 201, Issues 3-4, 5 October 2006, p. 1436-1443
|
| Paper #508 | Selected characteristics of an Ormocer and a conventional hybrid resin composite |
| DA Tagtekin, FC Yanikoglu, FO Bozkurt, B Kologlu, Sur H |
Dental Materials June 2004 p. 487-497
|
| Paper #513 | Sliding wear behaviour of ZrN and (Zr, 12wt% Hf) N coatings |
| E Atar, ES Kayali, H Cimenoglu |
Tribology International Volume 39, Issue 4 , April 2006, p. 297-302. ...
|
| Paper #528 | Surface modification of titanium by plasma nitriding |
| MP Kapczinski, C Gil, EJ Kinast, CA Santos |
Materials Research Volume 6 No 2 São Carlos April/June 2003
|
| Paper #567 | Tribological properties of perfluoralkylethyl methacrylate-polymethyl methacrylate copolymer thin films |
| Y Tongkhundam, A Sirivat, W Brostow |
Polymer Volume 45, Issue 26, December 2004, p. 8731-8738
|
| Paper #699 | Load effect in abrasive wear mechanism of cast iron with graphite and cementite |
| JJ Coronado, A Sinatora |
Wear of Materials 2009
|
| Paper #700 | Mild and severe wear of steels and cast irons in sliding abrasion |
| G Pintaude, FG Bernardes, MM Santos, A Sinatora, E Albertin |
Wear of Materials 2009
|
| Paper #749 | Effect of (Fe, Cr) 7C3 carbide orientation on abrasion wear resistance and fracture toughness |
| JJ Coronado |
Wear 2010 available online 10 November 2010
|
| Paper #761 | Film formation mechanism in glass lubrication by polymer latex dispersions |
| M Beauvais, B Piezel, F Hamidi, M Villalobos |
Thin Solid Films 2010 Volume 518, Issue 6, p. 1689-1697
|
| Paper #769 | Mechanical behavior of stiff coating on glass under sliding contact |
| X Geng, Z Zhang, E Barthel |
Wear 2010 Volume 269, Issues 5-6, p. 351-361
|
| Paper #836 | Effect of load and carbide orientation on abrasive wear resistance of white cast iron |
| JJ Coronado |
Wear Volume 270, Issues 11-12, 5 May 2011, Pages 823-827
|
| Paper #843 | Improved adhesion and tribological properties of fast-deposited hard graphite-like hydrogenated amorphous carbon films |
| T Zaharia, P Kudlacek, M Creatore |
Diamond and Related Materials Volume 20, Issue 9, October 2011, Pages 1266-1272
|
| Paper #846 | Mécanismes d'endommagement d'empilements optiques de faible adhésion sous contact glissant |
| D Davy, G Xuan |
19ÈME CONGRES FRANÇAIS DE MECANIQUE [CFM2009]
|
