| Paper #376 | The Effects of Additive Elements on the Sliding Wear Behaviour of Fe-base Hardfacing Alloys |
| Lee K Y, Lee S H, Kim Y, Hong H S, Oh Y M, Kim S J, |
Wear 255 (2003) 481 - 488
|
| Paper #572 | Wear Behaviour of Plasma Sprayed WC-Ni Coatings |
| C Tekmen, H Cetinel, A Turk, E Celik |
Key Engineering Materials Volume 264 - 268 (2004) p. 589 - 592
|
| Paper #630 | Wear behaviour of thermal flame sprayed FeCr coatings on plain carbon steel substrate |
| B Uyulgan, E Dokumaci, E Celik, I Kayatekin, NF Ak Azema, I Ozdemira, M Toparli, |
Journal of Materials Processing Technology Volume 190, Issues 1-3, 23 July 2007, p. 204-210
|
| Paper #682 | Tribological behavior of Cr2O3 coatings as bearing materials |
| Hakan Cetinel, Erdal Celik and Murat I Kusoglu |
Journal of Materials Processing Technology, Volume 196, Issues 1-3, 21 January 2008, p. 259-265
|
| Paper #745 | Assessing the Tribocorrosion Performance of Three Different Nickel-Based Superalloys |
| KC Tekin |
Tribology Letters 2010 Volume 37, Number 3, 563-572
|
| Paper #776 | Optimization of reinforcement content and sliding distance for AlSi7Mg/SiCp composites using response surface methodology |
| M Bayhan |
Materials & Design 2010 Volume 31, Issue 6, p. 3015-3022
|
| Paper #839 | Evaluation of Die-Soldering and Erosion Resistance of High Velocity Oxy-Fuel Sprayed MoB-Based Cermet Coatings |
| FF Khan, G Bae, K Kang, H Na, J Kim |
Journal of Thermal Spray Technology Volume 20, Number 5, 1022-1034
|
