| Paper #77 | Rolling Contact Fatigue of Polymers and Polymer Composites |
| Stolarski T A, |
Chapter 17 in Advances in Composite Tribology, Klaus Friedrich ed., Elsevier Composite Materials Series Volume 8, 1993.
|
| Paper #78 | Failure Modes of Ceramics in Rolling Contact |
| Hadfield M, Stolarski T A,, Cundill R T, |
Proc. Roy. Soc. Lond. A, 443, 1993, 607-621.
|
| Paper #79 | Failure Modes in Pre-Cracked Ceramic Elements under Rolling Contact |
| Hadfield M, Stolarski T A, Cundill R T, Horton S, |
Wear 169, 1993, 69-75.
|
| Paper #80 | Delamination of Ceramic Balls in Rolling Contact |
| Hadfield M, Stolarski T A,, Cundill R T, |
Ceramics International 19, 1993, 151-158.
|
| Paper #81 | Residual Stresses in Failed Ceramic Rolling-Contact Balls |
| Hadfield M, Fujinawa G, Stolarski T A,, Tobe S, |
Ceramics International 19, 1993, 307-313.
|
| Paper #82 | Accelerated Wear of Ceramic Balls |
| Stolarski T A, |
Ceramics Interactional 18, 1992, 379-384.
|
| Paper #83 | Failure Modes of Ceramic Elements with Ring-Crack Defects |
| Hadfield M, Stolarski T A, Cundill R T, Horton S, |
Tribology International, 26 (3), 1993, 157-164.
|
| Paper #84 | Rolling Contact Fatigue Behaviour of Thermally Sprayed Rolling Elements |
| Ahmed R, Hadfield M, |
Surface and Coatings Technology, 82, 1996, 176-186.
|
| Paper #95 | Mechanical and Tribochemical Effects During Accelerated Wear of Silicon Nitride in Diamond Slurries |
| Jisheng E, Stolarski T A, Gawne D T, |
Tribology Transactions, 40, 1997, 597-604.
|
| Paper #98 | Wear of High-Velocity Oxy-Fuel (HVOF)- coated Cones in Rolling Contact |
| Ahmed R, Hadfield M, |
Wear, 203-204, 1997, 98-106.
|
| Paper #104 | Rolling Contact Fatigue Performance of Plasma Sprayed Coatings |
| Ahmed R, Hadfield M, |
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.
|
| Paper #105 | The Effects of Gamma Irradiation on the Fatigue Wear Resistance of Ultra High Molecular Weight Polyethylene |
| Choudhury M, Hutchings I M, |
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.
|
| Paper #106 | Surface Fatigue of Engineering Polymers in Rolling Contact |
| Stolarski T A, Hosseini S M, Shogo Tobe, |
presented at First World Tribology Congress, Institution of Mechanical Engineers Conference C491, September 1997.
|
| Paper #158 | Rolling Contact Fatigue Failure Modes of Lubricated Silicon Nitride in Relation to Ring Crack Defects |
| Wang Y, Hadfield M, |
Wear 225-229 (1999), 1284-1292.
|
| Paper #236 | Wartungsfreie Trocken Laufende Gleitlager - Grundlagen und Berechnung |
| Berger M, Muller F, Deters L, |
Proc. 7th International Colloquium, Tribology 2000 - Plus, Esslingen, January 2000, Paper 18.1, 1371-1379.
|
| Paper #242 | The Measurement of Wear and Friction at High Temperatures. |
| Gee M G, Matharu C S, |
Proceedings of a conference on the mechanical testing of ceramics at high temperatures, April 1988, London. Elsevier, 1989, p.227, and in Int J High Technol. Ceram. 4(1988)319.
|
| Paper #247 | The Measurement of Sliding Friction and Wear of Ceramics at High Temperature. |
| Gee M G, Matharu C S, Almond E A, Eyre T S, |
Proceedings of the International Conference on the Wear of Materials, Denver, ASME, 1989. Also published in Wear 138(1990)169-187.
|
| Paper #260 | Wear Testing and Ceramics. |
| Gee M G, |
Proc Instn Mech Engrs, 208(1994)153-166.
|
| Paper #263 | High Temperature Wear Behaviour of Silicon Nitride, Ceramics, Charting the Future. |
| Melandri C, Gee M G, de Portu G, Guicciardi S, |
P Vincenzini (Editor), Techna Srl, 1995.
|
| Paper #268 | Hot Friction Testing of Ceramics. |
| Cox J M, Gee M G, |
Brit Ceram Trans, 97(1998)87-90.
|
| Paper #282 | A Review of ZDDPs: Characterisation and Role in Lubricating Oil |
| Barnes A, Bartle K, Thibon V, |
Tribology International, 34 (2001) 389-395.
|
| Paper #287 | Ring Crack Propagation in Silicon Nitride Under Rolling Contact |
| Wang Y, Hadfield M, |
Wear 250 (2001) 282-292.
|
| Paper #341 | Residual Stress Measurement of Hot Isostatically Pressed Silicon Nitride Rolling Elements |
| Hadfield M, Tobe S, |
Ceramics International 24 (1998) 387-392
|
| Paper #342 | Failure of Silicon Nitride Rolling Elements with Ring Crack Defects |
| Hadfield M, |
Ceramics International 24 (1998) 379-386
|
| Paper #379 | Si3N4 and Si3N4/SiC Composite Rings for Dynamic Sealing of Circulating Fluids |
| Carrapichano J M, Gomes J R, Oliveira R J, Silva R F |
Wear 255 (2003) 695 – 698
|
| Paper #390 | Keramik/Metall-Friktionspaarungen unter ungeschmierter Gleitbeanspruchung bei erhöhten Temperaturen - In German - Ceramic/metal-friction pairing under unlubricated sliding load at increased temperatures |
| Poser K, Schneider J, Zum Gahr Z-H |
GfT-Tribologie-Fachtagung 23.-25. September 2002, Göttingen,
|
| Paper #391 | Keramische Materialien für Friktionsanwendungen in ungeschmierten Systemen - In German - Ceramic materials for friction applications in unlubricated systems |
| Poser K, Rohde M, Schneider J, Zum Gahr K-H |
2. Statuskolloquium SFB 483, 27. Januar 2004, Universität (TH) Karlruhe, p. 13 -20
|
| Paper #392 | Untersuchungen an wartungsfreien trockenlaufenden Kunststoffgleitlagern - In German - Investigations on maintenance-free dry plastic material plain bearings |
| Müller F |
Publisher: Aachen: Shaker, 2003 (Fortschritte in der Maschinenkonstruktion; Bd. 2003/1) Zugl.: Magdeburg, Uni., Diss., 2003 ISBN3-8322-1566-2
|
| Paper #393 | Untersuchungen an ungeschmierten Keramik/Metall-Gleitpaarungen im einsinnigen Gleitkontakt im Hinblick auf Anwendungen in Friktionssystemen - In German - Investigations on unlubricated ceramics/metal sliding pairs under undirectional sliding contact in view of applications in friction systems |
| Schneider J, Zum Gahr K-H, Arslan A, Albers A |
Proc. Tribologie-Fachtagung 2001, Gesellschaft für Tribologie (GfT), Göttingen (2001), S. 57/1-10.
|
| Paper #394 | Entwicklung und tribologische Charakterisierung von lasermodifizierter Al2O3-Keramik im Hinblick auf Anwendungen in Friktionssystemen - In German - Development und tribological characterisation of laser-modified Al203-ceramics in view of applications in friction systems |
| Schneider J, Zum Gahr K-H |
Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe, K.-H. Zum Gahr u. J. Schneider (Hrsg.), 1. Statuskolloquium SFB 483, Karlsruhe (2002), S. 153-165.
|
| Paper #395 | Keramik/Metall-Friktionspaarungen unter ungeschmierter Gleitbeanspruchung bei erhöhten Temperaturen - In German - Ceramics/metal friction pairing under unlubricated friction loading at incremental temperatures |
| Poser K, Schneider J, Zum Gahr K-H |
Proc. Tribologie Fachtagung 2002, GfT, Gesellschaft für Tribologie e.V., Göttingen (2002), S. 14/1-14/10.
|
| Paper #396 | Keramische Materialien für Friktionsanwendungen in ungeschmierten Systemen - In German - Ceramic materials for friction applications in unlubricated systems |
| Poser K, Rohde M, Schneider J, Zum Gahr K-H |
Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe, K.-H. Zum Gahr u. J. Schneider (Hrsg.), 2. Statuskolloquium SFB 483, Karlsruhe (2004), S. 13-20.
|
| Paper #411 | Haft- und Gleitreibungsuntersuchungen an mehrphasigen Al2O3 – Keramiken im ungeschmierten Friktionskontakt mit lamellarem Grauguss. (Static and sliding friction tests on multiphase Al2O3-ceramics in unlubricated friction contact with lamellar grey iron) |
| K. Poser, J. Schneider, K.-H. Zum Gahr |
Tribologie und Schmierungstechnik 53, (1) (2006) 10-14.
|
| Paper #412 | Modelluntersuchungen zum Einsatz von Ingenieurkeramik in Gleit- und Friktionssystemen. (Model tests on use of engineering ceramics in sliding and friction systems) |
| K.-H. Zum Gahr, U. Litzow, K. Poser |
Tribologie und Schmierungstechnik 53 (6) (2006) 5 - 10.
|
| Paper #413 | Tribological behaviour of advanced ceramics. |
| K.-H. Zum Gahr, U. Litzow, K. Poser |
Proc. 15th International Colloquium Tribology – Automotive and Industrial Lubrication. Esslingen (2006).
|
| Paper #414 | Herstellung und tribologische Charakterisierung randschichtmodifizierter Oxidkeramik im ungeschmierten Gleitkontakt mit metallischen Gegenkörpern. (Production and tribological characterization surface layer modified oxide ceramics in unlubricated sliding contact with metallic counter bodies) |
| K. Poser |
Dissertation Universität Karlsruhe (TH), Berichte aus dem Institut für Werkstoffkunde II, Nr. 002, Shaker Verlag, Aachen (2006).
|
| Paper #445 | Comparison of four-ball and five-ball rolling contact fatigue tests on lubricated Si3N4/steel |
| J Kang, M Hadfield |
Materials & Design Volume 24, Issue 8, December 2003, Pages 595-604
|
| Paper #448 | Development and Introduction of Chrysler’s New Automatic Transmission Fluid |
| DW Florkowski, TE King, AP Skrobul, JL Sumiejski |
SAE Technical Papers Document Number: 982674
|
| Paper #467 | Functionality diagrams for hybrid mechanical seals with silicon nitride rings |
| JM Carrapichano, FJ Oliveira, RF Silva, JR Gomes |
Journal of the American Ceramic Society, Volume 88, Number 8, August 2005, pp. 2177-2180
|
| Paper #468 | High performance sealing with CVD diamond self-mated rings |
| MA Tomé, AJS Fernandes, FJ Oliveira, RF Silva, JM Carrapichano |
Diamond and Related Materials Volume 14, Issues 3-7, March-July 2005, Pages 617-621
|
| Paper #506 | Rolling contact fatigue performance of HIPed Si3N4 with different surface roughness |
| J Kang, M Hadfield, RT Cundill |
Ceramics International, Vol. 27, pp 781-794, 2001
|
| Paper #509 | Si3N4 and Si3N4/SiC composite rings for dynamic sealing of circulating fluids |
| JM Carrapichano, JR Gomes, FJ Oliveira, RF Silva |
Wear, Volume 255, Number 1, August 2003, pp. 695-698
|
| Paper #538 | The effects of lapping load in finishing advanced ceramic balls on a novel eccentric lapping machine |
| J Kang, M Hadfield |
Proceedings of the I MECH E Part B Journal of Engineering Manufacture, Number B7, July 2005, pp. 505-514
|
| Paper #539 | The effects of material combination and surface roughness in lubricated silicon nitride/steel balls |
| J Kang, M Hadfield, R Ahmed |
Tribology International Volume 37, Issue 6, June 2004, Pages 463-471
|
| Paper #540 | The influence of ring crack location on the rolling contact fatigue failure of lubricated silicon |
| Y Wang, M Hadfield |
Wear 243, Number 1, 28 August 2000, Page 157-166
|
| Paper #585 | Development of Tribological Test Methods |
| 22nd Danubia Adria Symposium, 2005, Parma (Italien), S. 192-193 (B, P) |
Grün F, Gódor I, Eichlseder W, Köberl H, Lang H
|
| Paper #586 | Entwicklung von tribologischen Prüfmethoden für geschmierte Bauteile |
| Symposium 2005 der Österreichischen Tribologischen Gesellschaft, 2005, Graz, ISBN 3-901657-19-3, S. 101-108 (V, B) |
Grün F, Gódor I, Araujo B, Eichlseder W
|
| Paper #587 | Calibrating Tribological Tests on the Basis of Simulation Models |
| Winter Workshop of Applied Mechanics, Czech Technical University Prague, 2006, Prag (Tschechien), ISBN 80-01-03455-0, S. 8-15 (B) |
Grün F, Gódor I, Vitek T, Eichlseder W
|
| Paper #588 | Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation |
| Winter Workshop of Applied Mechanics, Czech Technical University Prague, 2006, Prag (Tschechien), ISBN 80-01-03455-0, S. 46-51 (B) |
Vitek T, Grün F, Leitgeb A, Stoschka M, Gódor I, Eichlseder W
|
| Paper #589 | Messdatenerfassung an einer Prüfmaschine mit LabVIEW - Komplexe Datenerfassung an einem Tribometer (Reibprüfstand) - Zeitbasierte oder drehwinkelgesteuerte Messung bis 3.000 U/min |
| Virtuelle Instrumente in der Praxis, Begleitband zum Kongress VIP 2006, Hüthig Verlag, 2006, ISBN 3-7785-2976-6 (B, V) |
Lang A, Grün F
|
| Paper #590 | Schadensorientierte Prüfmethodenentwicklung am Beispiel eines Gleitlagers |
| 1. Leobener Betriebsfestigkeitstage, 2006, Planneralm, ISBN-10: 3-902544-00-7, ISBN-13: 978-3-902544-00-1, S. 45-60 (B, V) |
Grün F, Gódor I, Eichlseder W
|
| Paper #591 | Tribometric Analysis of two Tribo-Materials with Different Contact Geometries - Critical Reflection and Simulation of the Results; Analysis and Simulation of Contact Problems |
| Lecture Notes in Applied and Computational Mechanics, 27 (2006), S. 387-388, Springer Verlag, ISBN-13 978-3-540-31760-9 (B) |
Grün F, Gódor I, Araujo B, Eichlseder W
|
| Paper #592 | Tribologische Prüftechnik - Vergleich Bauteilprüfung von Gleitlagern mit Prüfung an einem tribologischen Ersatzmodell |
| Österreichische Ingenieur- und Architekten-Zeitschrift (ÖIAZ), 151 (2006) 1-3, S. 34-41 (B) |
Grün F, Gódor I, Eichlseder W
|
| Paper #593 | Tribological Studies on Sliding Bearings on the Basis of Damage Analysis |
| 34. Summer School – Conference, Advanced Problems in Mechanics (APM)“, 2006, St. Petersburg (Russland), http://www.apm.ruweb.net, S. 41 (B, V) |
Grün F, Gódor I, Eichlseder W
|
| Paper #594 | Development of a Tribological Functional and Failure Model for PTFE-Bz Compounds |
| 34. Summer School – Conference „Advanced Problems in Mechanics (APM)“, 2006, St. Petersburg (Russland), http://www.apm.ruweb.net, S. 38 (B, V) |
Gódor I, Major Z, Eichlseder W, Leitgeb A, Grün F
|
| Paper #595 | Tribological Test Engineering - Comparison of Sliding Bearings with Tribological Model Tests |
| Transactions of FAMENA, 30 (2006) 1, S. 37-44, Zagreb (Kroatien), ISSN 1333-1124 (B) |
Grün F, Gódor I, Eichlseder W
|
| Paper #596 | Schadensanalytik als Basis für tribometrische Untersuchungen am Beispiel eines Gleitlagers (Damage analysis as basis for tribometric investigation of a sliding bearing) |
| Tribologie Fachtagung der Gesellschaft für Tribologie (GfT) - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen, 2006, Göttingen, ISBN 978-3-00-019670-6 (B, V) |
Grün F, Gódor I, Eichlseder W
|
| Paper #597 | Characterisation of Tribomaterials by Simulation and Tribological Tests |
| 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, 2006, Podbanské (Slowakei), ISBN 80-8070-589-5 (B, P) |
Grün F, Gódor I, Leitgeb A, Köberl H, Eichlseder W
|
| Paper #598 | Funktionsweise von Werkstoffen unter tribologischer Beanspruchung |
| 4. Werkstoffkongress, 2006, Leoben (V) |
Gódor I, Grün F, Major Z
|
| Paper #599 | Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen (Comparison of the functional mode of tribo-materials of different structure in sliding applications) |
| Symposium 2006 der Österreichischen Tribologischen Gesellschaft, 2006, Steyr, ISBN 978-3-901657-23-8, S. 89-96 (B, V) |
Grün F, Gódor I, Eichlseder W, Gärtner W
|
| Paper #600 | Tribologisches Werkstoffverhalten von thermoplastischen Polyurethan-Dichtungswerkstoffen |
| Symposium 2006 der Österreichischen Tribologischen Gesellschaft, 2006, Steyr, ISBN 978-3-901657-23-8, S. 57-64 (B, V) |
Gódor I, Major Z, Grün F
|
| Paper #601 | Schadensorientierte Prüfmethoden und abgeleitete Funktionsmodelle für Gleitwerkstoffe (Damage-oriented testing methods and derived working models for sliding materials) |
| Tribologie und Schmierungstechnik, 2007, in Print (B) |
Grün F, Gódor I, Eichlseder W
|
| Paper #602 | Aluminium-base bearings – performance, limitations, new developments |
| CIMAC Congress 2007, Vienna (P) |
Mergen,R, Gumpoldsberger G, Grün F, Gódor I, Langbein F
|
| Paper #603 | Test Methods for the Characterisation of Different Designed Tribomaterials |
| Proceedings of the European Conference on Tribology ECOTRIB 2007, pp. 1123-1134, Ljubljana, Slovenia, ISBN 978-961-90254-8-2 (B, V) |
Gódor I, Grün F, Eichlseder W
|
| Paper #604 | Test Methods to Visualize the Break-down Behaviour of Sliding Bearing Materials |
| STLE/ASME International Joint Tribology Conference, 2007, IJTC2007-44150, in Print (B, V) |
Grün F, Gódor I, Eichlseder W, Gärtner W
|
