| Paper #161 | Metallographic Aspects of Wear |
| Eyre T S, Wilson F, |
Metals and Materials, 3(3), 1969, 86-91.
|
| Paper #162 | The Dry Sliding Wear Characteristics of Copper With and Without 0.08 Silver |
| Eyre T S, Wibberley R, |
Wear, 13, 1969, 27-38.
|
| Paper #163 | Wear Characteristics of Flake and Nodular Graphite Cast Iron |
| Eyre T S, Iles R P, Glasson D W, |
Wear, 13, 1969, 229-245.
|
| Paper #164 | Effect of Matrix Structure and Hardness on the Wear Characteristics of an S.G. Cast Iron |
| Eyre T S, |
Wear, l4, 1969, 107-117.
|
| Paper #165 | The Relationship Between Load and Sliding Distance in the Initiation of Mild Wear in Steels |
| Farrell R M, Eyre T S, |
Wear, 15 (5), 1970, 359-372
|
| Paper #166 | Surface Aspects of Unlubricated Metal to Metal Wear |
| Eyre T S, Maynard D, |
Wear, 18, 1971, 301-310.
|
| Paper #167 | Development of Materials for Automobile Crankshafts |
| Eyre T S, Lea M, |
Engineering Materials and Design, 15, 1972, 327-333.
|
| Paper #168 | Running-in Characteristics of Graphitic Cast Iron |
| Eyre T S, Maynard D, |
Institution of Mechanical Engineers, l9th Conference of Tribology Group, Paper C101/72 (1972).
|
| Paper #169 | Wear Characteristics of Grey Cast Iron |
| Eyre T S, |
ASLE Paper No.72-LC-7B-1, 1972.
|
| Paper #170 | The Formation of White Layers at Rubbing Surfaces |
| Eyre T S, Baxter A, |
Metals and Materials, 6, 1972, 435-439.
|
| Paper #171 | Effect of Phosphorus on the Friction and Wear Characteristics of Grey Cast Iron |
| Eyre T S, Williams P, |
Wear, 24, 1973, 337-349.
|
| Paper #172 | Friction and Wear of Some Engineering Materials Against Chromium Plating |
| Gologan V, Eyre T S, |
Wear, 28, 1974, 49-57.
|
| Paper #173 | Assessing the Durability of Electro-deposited Metal Films |
| Briscoe B, Eyre T S,, Gologan V, |
Wear, 28, 1974, 271-275.
|
| Paper #174 | Use of the Scanning Electron Microscope in Wear Studies |
| Eyre T S, Dutta K K, |
ASLE/ASME Conference 1974, ASLE Paper 74-LC1B-1.
|
| Paper #175 | Some Metallurgical Aspects of Scuffing |
| Eyre T S, Dutta K K, |
Proc. I. Mech. E. International Conference on Scuffing, 1975, Paper C74/75.
|
| Paper #176 | Effect of Boronising on Friction and Wear of Ferrous Metals |
| Eyre T S, |
Wear, 34(3), 1975, 383-397.
|
| Paper #177 | Wear of Sintered Metals |
| Eyre T S, Walker R K, |
Powder Metallurgy, 1(1), 1976, 22-30.
|
| Paper #178 | Wear Characteristics of Metals |
| Eyre T S, |
Tribology International, 9(5), 1976, 203-212.
|
| Paper #179 | The Effect of Phosphating on the Friction and Wear Properties of Grey Cast Iron |
| Perry J, Eyre T S, |
Wear, 43, 1977, 185-197.
|
| Paper #180 | Effect of Boronising on Adhesive Wear of Titanium Alloys |
| Eyre T S, Alsalim H, |
Tribology International, 10(5), 1977, 281-285.
|
| Paper #181 | Wear of Aluminium - Silicon Alloys |
| Shivanath R, Sengupta P K, Eyre T S, |
The British Foundryman, 70(12), 1977, 349-356.
|
| Paper #182 | The Mechanisms of Wear |
| Eyre T S, |
Tribology International, April 1978, 91-96.????
|
| Paper #183 | The Use of a Replica Technique to Study Wear |
| Eyre T S, |
Tribology International, 11(4), 1978, 241-242.
|
| Paper #184 | Cylinder Liner Wear in Low Speed Diesel Engines |
| Nadel J, Eyre T S, |
Tribology International, 11(5), 1978, 267-271.
|
| Paper #185 | A Practical Interpretation of Unlubricated Wear Data for Some Non-Ferrous Metals |
| Stott G, Eyre T S, |
Wear, 50, 1978, 285-297.
|
| Paper #186 | The Metallurgy and Wear Characteristics of Boride Coatings |
| Eyre T S, Morri J, |
Heat Treatment of Metals, 4(5), 1978, 103-105.
|
| Paper #187 | Wear Resistance of Metals |
| Eyre T S, |
Treatise on Materials Science and Technology, Volume 13 "Wear", Scott D. ed., Academic Press Inc., 1979.
|
| Paper #188 | Tribological Characteristics of Diffusion Coatings |
| Eyre T S, |
The Institution of Metallurgists, Surface Treatments for Protection, Spring Review Course, Series 3, No. 10, April 1978.
|
| Paper #189 | The Effect of Surface Topography on the Wear of Steel |
| Shafia R A, Eyre T S, |
Wear, 61(1), 1980, 87-100.
|
| Paper #190 | Wear of Aluminium Alloys |
| Eyre T S, |
Microstructural Science Vol. 8, Proceedings of the 12th Annual Technical Meeting of the International Metallographic Society, Stevens, Vandervoort and McGall eds., 1980.
|
| Paper #191 | Wear Characteristics of Piston Rings and Cylinder Liners |
| Eyre T S, Dent N, Dale P, |
ASLE Lubrication Engineering, 4(4), 1981, 216-221.
|
| Paper #192 | Wear Mechanisms |
| Eyre T S, |
Powder Metallurgy, 24(2), 1981, 57-63.
|
| Paper #193 | Wear Diagnosis by Metallurgical Means |
| Eyre T S, |
ASLE Lubrication Engineering, 7(1), 1981, 603-607.
|
| Paper #194 | Oxidative Wear of Aluminium Alloys |
| Eyre T S, Razavizadeh K, |
Wear, 79, 1982, 325-333.
|
| Paper #195 | Oxidative Wear of Aluminium Alloys |
| Eyre T S, Razavizadeh K, |
Wear, 87(3), 1983, 261-271.
|
| Paper #196 | Wear of a Cobalt and a Nickel Alloy |
| Abdul-Mahdi F S, Eyre T S, |
ASLE Lubrication Engineering, 40(4), 1984, 218-224.
|
| Paper #197 | Wear Characteristics of Castings used in Internal Combustion Engine |
| Eyre T S, |
Metals Technology, 11(3), 1984, 81-90,
|
| Paper #198 | Wear of Aluminium Alloys |
| Eyre T S, |
Metals Society World, 3(1), 1984, 11-12.
|
| Paper #199 | An Investigation Into The Failure of a Slew Ring Type Bearing Taken From a Single Point Mooring |
| Eyre T S, |
In Tribology Offshore, ISBN 85298 5231, MEP, 1984, 15-24.
|
| Paper #200 | Wear of Digger Teeth |
| Mashloosh K M, Akbasoglu F C, Eyre T S, |
Tribology in Mineral Extraction, War on Wear, ISBN 085298 5436, Paper C343/84, 1984, 29-34.
|
| Paper #201 | A Study Of Some Cylinder Liner Wear Problems Following the Introduction of High Speed Trains On British Rail |
| Eyre T S, |
Proc. I. Mech. E. Conference, "Combustion Engines, Reduction of Friction and Wear", ISBN 085298 5592, C74/85, 1985, 139-153.
|
| Paper #202 | Wear of Coatings on Aluminium and its Alloys |
| Abdul-Mahdi F S, Eyre T S, |
First International Conference on Surface Engineering, The Welding Institute, 1985, p16, 203-222.
|
| Paper #203 | Abrasive Wear and its Application to Digger Teeth |
| Mashloosh K M, Eyre T S, |
Tribology International, 18(5), 1986, 259-266.
|
| Paper #204 | Friction and Wear of Aluminium and its Alloys |
| Eyre T S, Abdul-Mahdi F S, |
Aluminium Technology, Institute of Metals, Paper 100, 1986, 485-492.
|
| Paper #205 | Friction and Wear of Some Ceramics in an Overhead Finger Follower System |
| Eyre T S, Benson J, |
S.A.E. Paper 860398, 1986.
|
| Paper #206 | Effect of Attack Angle in Abrasive Wear |
| Mashloosh K M, Eyre T S, |
Metals and Materials, 2(7), 1986, 426-430.
|
| Paper #207 | Wear of Ceramics Under Sliding Conditions |
| Arbabi H, Eyre T S, |
Metals and Materials, 2(10), 1986, 625-630.
|
| Paper #208 | Investigation into the Lubricating Effectiveness of Molybdenum Disulphide Dispersion in a Fully Formulated Oil |
| Arbabi H, Eyre T S, |
Tribology International, 19(2), 1986, 87-91.
|
| Paper #209 | Bore Polishing - Identification and Simulation |
| Al-Khalidi G F, Eyre T S, |
Tribology International, 20(1), 1987, 18-24.
|
| Paper #210 | Selecting the Optimum Surfacing Technique for Wear Resistance |
| Eyre T S, |
Proc. 2nd International Conference on Surface Engineering, The Welding Institute, 1987, 43-1 to 43-14.
|
| Paper #211 | Wear of Hard Coatings on Aluminium Under Both Dry and Lubricated Conditions |
| Eyre T S, Abdul-Mahdi F S, |
Proc. 2nd International Conference on Surface Engineering, The Welding Institute, 1987, 2-1 to 2-16.
|
| Paper #212 | Influence of Ion Implantation in Extending Tool Life in Polymer Processing |
| Furze D, Eyre T S, |
Surface Engineering, 4(3), 1988, 227-232.
|
| Paper #213 | Development of Tribo-Test Methods |
| Eyre T S, |
Eurotrib '89 Congress, Helsinki, June 1989, Vol. 5, 142-149.
|
| Paper #214 | The Testing of Materials in Tribology |
| Eyre T S, Davis F A, |
Surface Stability, Institute of Metals, 1989, 186-240.
|
| Paper #215 | Characterisation and Simulation of Wear Occurring in the Cylinder Bore of the Internal Combustion Engine |
| Eyre T S, Dutta K K,, Davis F A, |
Proc. I. Mech. E. Conference "Combustion Engines, Reduction of Friction and Wear", C375/029, ISBN 085298 6955, 1989, 125-132. And reproduced Tribology International, 23(1), 1990, 11-16.
|
| Paper #216 | Friction and Wear Control in Industry |
| Eyre T S, |
Proceeding Nordtrib '90, Hirtsals, Denmark, ISBN 87-983538-0-2, 1990, 31-46.
|
| Paper #217 | Tribological Characteristics of Engineering Ceramics |
| Eyre T S, |
11th RISO International Symposium, Roskilde, Denmark, 13-26.
|
| Paper #218 | The Effect of a Friction Modifier on Piston Ring and Cylinder Bore Friction and Wear |
| Davis F A, Eyre T S, |
Tribology International, 23(3), 1990, 163-171.
|
| Paper #219 | Friction and Wear Control in Industry |
| Eyre T S, |
Metals and Materials, 7(3), 1991, 143-148.
|
| Paper #220 | Wear of Plain Bearing Materials with Particular Reference to the Role of Soft Phases |
| Davis F A, Eyre T S, |
Materials Science and Technology
|
| Paper #221 | The Effect of Silicon Content and Morphology on the Wear of Aluminium/Silicon Alloys under Dry and Lubricated Conditions |
| Davis F A, Eyre T S, |
Tribology International, 27(3), 1994, 171-181.
|
| Paper #222 | Adhesive Wear and Rolling Contact Fatigue Performance of P/M Materials made from Mixtures of Low and High Alloy Ferrous Powders |
| Nurthen P D, Brewin P R, Davis T, Whitehead J A, |
MPIF Conference, "Advances in Powder Metallurgy & Particulate Materials, San Francisco, Vol. 6, 1992, 265-279.
|
| Paper #223 | Wear Performance of Compositions made by Low Alloy Iron/High Alloy Powder Mixtures |
| Nurthen P D, Davis T, Wood J V, Cadle T, Landgraf C, |
MPIF Conference, "P/M Reaching New Heights", Chicago, Vol. 5, 1991, 135.
|
| Paper #224 | A New P/M Stainless Steel with Improved Corrosion and Wear Resistance |
| Saunders J P, Nurthen P D, Trilk N, Woods P, |
MPIF Conference, 1993.
|
| Paper #225 | Diamond Like Carbon Coatings via a Low Temperature Hybrid PACVD Process |
| Tither D, Ahmed W, Ahmed E, |
Presented at 4th International Symposium on Advanced Materials ISAM-95, Islamabad, Pakistan, 1995.
|
| Paper #231 | A Study of the Performance and Properties of Diamond Like Carbon (DLC) Coatings Deposited by Plasma Chemical Vapour Deposition (CVD) for Two-Stroke Engine Components |
| Tither D, Ahmed W, Sarwar M, Penlington R, |
Proceedings of the 2nd International Conference on Heat-Resistant Materials, Natesan K, Ganesan P. and Lai G. Eds., Gatlinburg, Tennessee, 11-14 September 1995, 457-461.
|
| Paper #235 | Palm Oil and Mineral Oil Based Lubricants - Their Tribological and Emission Performance |
| Masjuski H H, Maleque M A, Kubo A, Nonaka T, |
Tribology International, 32(6), 1999, 305-314.
|
| Paper #239 | Comparison of Sliding and Abrasive Wear Mechanisms for Cemented Carbides and Ceramics. |
| Almond E A, Lay L A, Gee M G, |
Proceedings of 2nd International Conference on the Science of Hard Materials, Institute of Physics Conference Series No 75: p919, Adam Hilger, 1986.
|
| Paper #240 | Results from a UK Interlaboratory Project on Dry Sliding Wear. |
| Almond E A, Gee M G, |
Wear 120(1987)101.
|
| Paper #241 | Some Observations of Ceramic-Metal Sliding Wear. |
| Gee M G, |
British Ceramics Proceedings, 39(1987)141.
|
| Paper #243 | Ceramic Wear Testing and Design. |
| Gee M G, Almond E A, |
Materials Engineering and Design, Eds B F Dyson and D R Hayhurst, Proceedings of the I of M meeting on Materials and Design, May 1988, 1989, Institute of Metals, p.159.
|
| Paper #244 | Effects from vibrations in wear testing of ceramics. |
| Gee M G, Almond E A, |
Mat Sci Technol, 4(1988)655.
|
| Paper #245 | Effects of Test Variables in Wear Testing of Ceramics. |
| Gee M G, Almond E A, |
Mat Sci Technol, 4(1988)877.
|
| Paper #246 | Effect of Surface Finish on the Sliding Wear of Alumina. |
| Gee M G, Almond E A, |
J Mat Sci, 25(1990)296.
|
| Paper #249 | The Effects of Surrounding Atmosphere on the Wear of Sintered Alumina. |
| Perez-Unzueta A J, Beynon J H, Gee M G, |
To be published in Wear.
|
| Paper #250 | Results from a UK interlaboratory exercise on the wear of alumina. |
| Gee M G, |
ASTM STP 1167, Wear Testing of Advanced Materials, pp. 129-150.
|
| Paper #251 | Effect of Test Machine Dynamics on the Sliding Wear of Alumina, Wear Testing of Advanced Materials. |
| Gee M G, |
ASTM STP 1167, pp.24-44.
|
| Paper #252 | Modification to the Surface Layers of Alumina in Sliding Wear. |
| Gee M G, |
British Ceramic Proceedings, 48(1991)11-25.
|
| Paper #253 | The Formation of Glass in the Wear of Reaction Bonded Silicon Nitride. |
| Gee M G, |
J Appl Phys D, 1A(1992)A182-A188.
|
| Paper #254 | The Application of Confocal Scanning Microscopy to the Examination of Ceramic Wear Surfaces. |
| Gee M G, McCormick N J, |
J Appl Phys D, 1A(1992)A230-235.
|
| Paper #255 | The Formation of Aluminium Hydroxide in the Sliding Wear of Alumina. |
| Gee M G, |
Wear, 153(1992)201-227.
|
| Paper #256 | Sliding Wear of Alumina. |
| Gee M G, |
J Hard Materials, 3(1992)363-377.
|
| Paper #258 | Wear Metrology: The Art of Determining a Material's Performance. |
| Gee M G, |
Materials World, May 1993.
|
| Paper #260 | Wear Testing and Ceramics. |
| Gee M G, |
Proc Instn Mech Engrs, 208(1994)153-166.
|
| Paper #267 | Measurement of Friction Under Simulated Metal Working Conditions in Miniaturised Test Systems. |
| Gee M G, Loveday M S, Brookes M R, |
1997
|
| Paper #303 | Combined effect of speed and humidity on the wear of silicon nitride. |
| Gee M G, Butterfield D, |
NPL Report DMM (A)36, September 1991.
|
| Paper #304 | Guidelines for Unlubricated Sliding Wear Tests: Part 1, General Approach. |
| Gee M G, |
NPL Report DMM(A)96, April 1993.
|
| Paper #305 | Guidelines for Unlubricated Sliding Wear Tests: Part 2, Procedures for Pin-on-Disc Testing. |
| Gee M G, |
NPL Report DMM(A)97, April 1993.
|
| Paper #312 | Development and Validation of Test Methods for Thin Hard Coatings (FASTE). |
| Vetters H, Meneve J, Jennett N M, Gee M G, von Stebut J, Kelly P, |
SMT Contract MAT1-CT 9400045, April 1998.
|
| Paper #350 | Laboratory Test Rig Simulation of Bore Polish |
| Gondal A K, Davis F A, Eyre T S, |
Materials Science and Technology January 1998 Vol 14
|
| Paper #375 | Mapping Sliding Wear of Steel in Aqueous Conditions |
| Stack M M, Chi K, |
Wear 255 (2003) 456 – 465
|
| Paper #382 | Sliding Wear Behaviour of Electrodeposited Cobalt-tungsten and Cobalt-tungsten-iron Alloys |
| Capel H, Shipway P H, Harris S J, |
Wear 255 (2003) 917 – 923
|
