TE 57 PRESSURIZED LUBRICITY TESTER
Keywords:
- adhesive wear
- diesel fuel lubricity
- fuel lubricity
- lubricity
- refrigerant lubricity
- high temperature fuel lubricity
Description:
The TE 57 Pressurized Lubricity Tester is a development based the standard TE 77 High Frequency Friction Machine. It incorporates a pressurized test enclosure with moving parts sealed by stainless steel bellows. Load is applied manually by means of a linkage mechanism acting through transverse bellows. The complete test assembly may be removed from the test machine for cleaning purposes.
The unit incorporates a standard SUPERSLIM interface and COMPEND 2000 sequence programmable control and data acquisition software.
Specification:
| Contact Geometry: | Ball on Plate
|
| Cylinder on Plate
|
| Ball Specimen: | 6 mm and 10 mm diameter
|
| Load: | 10 to 100 N
|
| Stroke: | Mechanically set 1 to 5 mm
|
| Frequency: | 2.5 Hz to 50 Hz
|
| Chamber Pressure: | 4 bar maximum
|
Computer Controlled Parameters:
Frequency
Temperature
Test Duration
Manually Controlled Parameters:
Load
Stroke Length
Enclosure Pressure
Measured Parameters:
Friction
Temperature
Contact Potential
Frequency
Enclosure Pressure
Order As:
