TE 80 TWO STATION FUEL LUBRICITY WEAR TEST MACHINE
Keywords:
- adhesive wear
- diesel fuel lubricity
- fuel lubricity
- lubricity
Description:
The TE 80 Two Station Fuel Lubricity Wear Test Machine is a simplified version of the earlier TE 70SLIM Micro Friction Machine and the TE 77 High Frequency Friction Machine. It incorporates two test stations with heater pads and mounting arrangements for ISO 12156 and ASTM D6079 fuel lubricity test specimens. Load is applied manually by means of dead weights applied directly to the fixed ball specimen carrier by means of a loading yoke.
Machine controls are limited to speed control of the drive motor to give the required frequency, temperature control of the specimen bath and test duration. Test data is limited to post test wear scar measurement only and no facilities are provided for friction force measurement.
Specification:
| Contact Geometry: | Ball on Plate
|
| Ball Specimen: | 6 mm diameter
|
| Load: | 2 to 10 N
|
| Stroke: | 1 mm
|
| Frequency: | 2.5 Hz to 50 Hz
|
Manually Controlled Parameters:
Frequency
Temperature
Test Duration
Manually Set Parameters:
Load
Measured Parameters:
Specimen Wear Scar (post test)
Order As:
