|
|
We present an alphabetical listing of the many international standards linked to PLINT TRIBOLOGY products.
Select a standard number to view the related product specifications.
| ASTM B 611 | Test Method for Abrasive Wear Resistance of Cemented Carbides |
| ASTM D 1894 | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D 2266 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM D 2596 | Standard Method for Measurement of Extreme Pressure Properties of Lubricating Grease (Four-Ball Method) |
| ASTM D 2783 | Standard Method for Measurement of Extreme Pressure Properties of Lubricating Fluids (Four-Ball Method) |
| ASTM D 3702 | Standard Test Method for Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 4172 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM D 5183 | Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine |
| ASTM D 5706 | Standard Test Method for Measuring Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine |
| ASTM D 5707 | Standard Test Method for Determining Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine |
| ASTM D 6079 | Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) |
| ASTM F 732 | Standard Practice for Reciprocating Pin-on-Flat Evaluation of Friction and Wear Properties of Polymeric Materials for use in Total Joint Prostheses |
| ASTM F 2661 | Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer |
| ASTM G 65 | Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
| ASTM G 77 | Standard Test Method for Wear Resistance by Block-on-Ring Wear Test |
| ASTM G 99 | Standard Test Method for Wear Testing with a Pin-on-Disc Apparatus |
| ASTM G 105 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM G 132 | Standard Test Method for Pin Abrasion Testing |
| ASTM G 133 | Standard Test Method for Linearly-Reciprocating Ball-on-Flat Sliding Wear |
| ASTM G 137 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-on-Ring Configuration |
| ASTM G 181 | Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| BS 903:Part A61 | Physical Testing of Rubber: Determination of the Frictional Properties of Rubber |
| BS EN 1071-6 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
| BS EN 1071-12 | Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test |
| CEC F-06-A-96 | Diesel Engines - Diesel Fuel - Performance Requirement and Test Method for Assessing Fuel Lubricity |
| CEC L-45-T-93 | Viscosity Shear Stability of Transmission Lubricants (Taper Roller Bearing Rig) |
| DEF STAN 91-110/1 | Wear Performance Test for Aqueous Polyglycol Based Hydraulic Fluids |
| DIN 50324 | Measuring Friction and Wear: Model Experiments on Sliding Friction in Solids (Ball on Disc System) |
| DIN 51350 Part 6 | Testing Lubricants: Testing in the Shell Four-Ball Tester - Testing of Shear Stability of Lubricating Oils Containing Polymers |
| DIN 51350 Parts 1-5 | Testing Lubricants: Testing in the Shell Four-Ball Tester |
| IP 239 | Extreme Pressure Properties: Friction and Wear Test for Lubricants: Four-Ball Machine |
| IP 300 | Rolling Contact Fatigue Tests for Fluids in a Modified Four Ball Machine |
| ISO/CD 11008 | Petroleum Products and Lubricants - Determination of Extreme Pressure Properties of Lubricating Greases - Four Ball Method |
| ISO/DIS 12156-2 | Diesel Engines - Diesel Fuel - Performance Requirement and Test Method for Assessing Fuel Lubricity |
| ISO/DIS 7148-2 | Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials |
| JASO M 349-2001 | Test Method for Anti-Judder Performance of Automatic Transmission Fluids |
Return to the Catalogue Index
Copyright © 2010 Phoenix Tribology Ltd.