Test Standards Index

This is an alphabetical listing of the various international standards with links to relevant machines.

ASTM B 611 Test Method for Abrasive Wear Resistance of Cemented Carbides
TE 65
ASTM D 2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
TE 91 TE 92 ST-FB
ASTM D 2596 Standard Method for Measurement of Extreme Pressure Properties of Lubricating Grease (Four-Ball Method)
TE 91 TE 92 ST-FB
ASTM D 2783 Standard Method for Measurement of Extreme Pressure Properties of Lubricating Fluids (Four-Ball Method)
TE 91 TE 92 ST-FB
ASTM D 3702 Standard Test Method for Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
TE 91 TE 92 ST-TW
ASTM D 4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
TE 91 TE 92 ST-FB
ASTM D 5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
TE 91 TE 92 ST-FB
ASTM D 5706 Standard Test Method for Measuring Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine
TE 77 ST-RT
ASTM D 5707 Standard Test Method for Determining Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine
TE 77 ST-RT
ASTM D 6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
TE 77 ST-RT
ASTM D 6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using a High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM D 7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM D 7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM D 7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM D 8227 Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM D 8503 Standard Test Method for Determining the Scuffing Temperature Limit of Lubricating Oils Using a High-Frequency, Linear-Oscillation Test Machine
ST-RT
ASTM F 2661 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
TE 91
ASTM F 732 Standard Practice for Reciprocating Pin-on-Flat Evaluation of Friction and Wear Properties of Polymeric Materials for use in Total Joint Prostheses
TE 67 TE 86
ASTM G 105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
TE 65
ASTM G 119 Standard Guide for Determining Synergism Between Wear and Corrosion
TE 79 TE 92
ASTM G 132 Standard Test Method for Pin Abrasion Testing
TE 79 ST-BA
ASTM G 133 Standard Test Method for Linearly-Reciprocating Ball-on-Flat Sliding Wear
TE 77
ASTM G 181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
TE 77
ASTM G 203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
TE 77
ASTM G 206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
TE 77
ASTM G 223 Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
ST-TC
ASTM G 65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
TE 65
ASTM G 76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
TE 68
ASTM G 77 Standard Test Method for Wear Resistance by Block-on-Ring Wear Test
TE 53
ASTM G 99 Standard Test Method for Wear Testing with a Pin-on-Disc Apparatus
TE 67 TE 79 TE 91 TE 92
ST-TW
BS EN 1071-12 Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test
TE 77
BS EN 1071-6 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
TE 66
CEC F-06-A-96 Diesel Engines – Diesel Fuel – Performance Requirement and Test Method for Assessing Fuel Lubricity
TE 77
CEC L-45-T-93 Viscosity Shear Stability of Transmission Lubricants (Taper Roller Bearing Rig)
TE 92 ST-FB
DEF STAN 91-110/1 Wear Performance Test for Aqueous Polyglycol Based Hydraulic Fluids
TE 77
DIN 50324 Measuring Friction and Wear: Model Experiments on Sliding Friction in Solids (Ball on Disc System)
TE 67 TE 79 TE 91 TE 92
DIN 51350 Part 6 Testing Lubricants: Testing in the Shell Four-Ball Tester – Testing of Shear Stability of Lubricating Oils Containing Polymers
TE 92 ST-FB
DIN 51350 Parts 1-5 Testing Lubricants: Testing in the Shell Four-Ball Tester
TE 92 ST-FB
IP 239 Extreme Pressure Properties: Friction and Wear Test for Lubricants: Four-Ball Machine
TE 92 ST-FB
IP 300 Rolling Contact Fatigue Tests for Fluids in a Modified Four Ball Machine
TE 92 RCF2 ST-FB
ISO/CD 11008 Petroleum Products and Lubricants – Determination of Extreme Pressure Properties of Lubricating Greases – Four Ball Method
TE 92
ISO/DIS 12156-2 Diesel Engines – Diesel Fuel – Performance Requirement and Test Method for Assessing Fuel Lubricity
TE 77
ISO/DIS 7148-2 Plain Bearings – Testing of the Tribological Behaviour of Bearing Materials
TE 53 TE 67
JASO M 349-2001 Test Method for Anti-Judder Performance of Automatic Transmission Fluids
TE 92M